Ref: AMP-TCx-LIN

Linearizing Thermocouple Amplifier

  • Nonlinear thermocouple input signal is converted to linear output voltage (ie. 0°C=0v, 200°C=2v, etc...)
  • Input signal is amplified to 10mV per degree Celsius
  • Cold junction compensated
  • Units available in K and J-type
  • Signal bandwidth = 10 Hz
  • Input signals can be grounded or isolated

Download the product sheet

?

The AMP-TC-LIN Linearizing Thermocouple Amplifier is designed to provide cold junction compensation, amplification, and linearization of thermocouple sensors. These amplifiers may be used in conjunction with Michigan Scientific slip rings. While all Michigan Scientific slip ring assemblies are manufactured with instrumentation quality rings and brushes, greater data accuracy is achieved by locating the thermocouple amplifier on the rotating side of the slip ring. This configuration greatly improves signal quality because the amplifier is located closer to the sensor, which reduces errors due to temperature gradients across dissimilar metals in the slip ring and magnetic interference.

Amplifiers are available for K and J thermocouples. For more channels, more than one amplifier may be used with a single control unit. The amplifiers can be adhered, potted or strapped to many different types of parts. Some Michigan Scientific slip rings are available with the amplifiers built into the rotor.

Electronic type
Signal Conditioning
Input channels
1 , 2 , 3
Input signal type
Thermocouple
Analog output signal
0-10 VDC
Datalogger
non
Tension d'alimentation
± 15 Vcc
Protection Class
IP40
Housing
Plastic

Dimensions

  • Wiring
  • Slip ring
  • Power supply unit

Related products

collecteur tournant mesure

S-Series

Slip Ring - End of Shaft - 4, 6, 8, 10 Circuit - 12000 rpm
collecteur tournant mesure short S Series

SHORT S-SERIES

Slip Ring – End of Shaft – Compact – 4 to 10 Circuits - 12000 rpm
Conditionneur de mesure

AMP-SG-MH

Miniature 1-channel Strain Gage Amplifier
collecteur tournant

B4-2, B6-2, B8-2

Slip Ring – Tubular – 4, 6 or 8 circuits – 50.8mm – 7000rpm
Phone +33 1 46 91 93 32