Ref: FX-HM

Cable sensor - 50 to 375 mm - Contactless - Output 0 to 10 V

  • Output signal: 0 to 10 VDC
  • Measuring range: from 50 to 375 mm
  • Linearity: < 1% of full scale
  • Construction: Thermo-plastic
  • Protection: IP65
  • Temperature: -25°C to 75°C

Download the product sheet

Log in to see the price
Login
?

Introduction

The FX-HM cable sensor is a simple and economical industrial displacement sensor for precise and complex displacement or position measurement. The measurement is done without contact by Hall effect, allowing a very high number of cycles to be achieved. 9 measuring ranges are available from 50 mm to 375 mm. The integration in the application is facilitated by the amplified output signal (0-10 VDC) and a perfectly linear response with the cable stroke. The frequency response is 25 Hz for the 50 mm version. Its excitation varies from 4.9 to 30 Volts and does not require a high current to operate. It can also be powered by a battery.

## Mounting and measuring principle

The cable is directly or indirectly linked to the displacement to be measured, which allows a non-normal or non-linear displacement. The measurement can be offset by cable extensions or pulleys. The cable sensor is not necessarily aligned with the displacement. The body of the sensor and the cable are indifferently fixed on the fixed or mobile part of the measurement.

Applications

The FX-HM sensor is recommended for

  • measuring travel on suspensions
  • measurement of valve/throttle opening
  • machine monitoring
  • any other industrial application with space constraints
Technologie
Wire rope Position
Etendue de mesure linéaire
375 / 50 / 75 / 100 / 125 / 150 / 200 / 250 / 300 mm
Measuring range
±51 à ±250 mm, ± 251 à ±2 m
Nonrepeatability
0.015 % FS
Analog output signal
0-10 VDC
Protection Class
IP52, IP65
Tension d'alimentation
10 Vcc
Housing
Plastic

Dimensions

Option Available specifications
measuring range 9 measuring ranges from 50 to 375 mm
Length of the electrical cable 4 available lengths from 15 cms to 2m
IP protection class IP52 or IP65
3-pin connector delivered without or with
Application cable connector (Mating) delivered without or with
Cable material Option N: Ø 0,45 mm in Stainless Steel in a nylon sheath Option S: Ø. 0,4 mm in Stainless Steel
Type of cable attachment Drilled ring or fasteners
  • Display conditioner
  • Calibration and wiring
  • Right angle mounting bracket
  • Two-axis swivel base.

Related products

Capteur de déplacement à câble compact

LX-PA / LX-EP

Compact, low cost, IP40, 0-1250mm wire rope position sensor with analog and digital outputs
potentiometric cable sensor HX series

HX Series

Cable displacement sensor - IP65/68 - 50 mm to 50 m - Analog output
Cable displacement sensor

JX Series

Cable displacement sensor - 50 mm to 2 m
Cable sensor

Standard Series

Wire rope position transducer - IP40 - 50 mm to 2 m - TTL or analog output
Phone +33 1 46 91 93 32 Contact Contact form Newsletter S'inscrire à la newsletter