Ref: PMI 520 LVDT

1-channel signal conditionning module for LVDT sensors

  • 1-channel analog amplifier for LVDT sensors
  • Method : (A/B) or (A-B)/(A+B)
  • Voltage supply : 3 V RMS ±10%, 5 kHz ±10%
  • Input sensitivity : 5 values from 10 mV/V to 3000 mV/V
  • Gain : 10 mV/V to 3000mV/V
  • Signal output : ±10V, 4-20mA ,0–20 mA, ±20mA, 0-10V
  • Operating temperature : -10 à +60°C

Download the product sheet

?

Presentation

The PMI-520-LVDT modules are conditioning amplifiers for LVDT sensors, which by their very good accuracy (0.05% of full scale), frequency response (Response time: 1.5 ms) and stability, are perfectly suited for industrial use in R&D laboratory, production, or embedded. Two types of demodulations are available:

  • A/B, PMI-520-LVDT module (698)
  • (A-B) / (A+B), PMI-520-LVDT module (598). All sensitivity ranges from 10 mV/V to 3000 mV/V are covered by these conditioners: The sensitivities are divided into 5 ranges programmable by jumpers inside the device.

Installation, operation

This card, in DIN format, can easily be installed in an electrical cabinet. The card is supplied with 24VDC, and then supplies the sensor. The type of output signal (voltage or current) is directly proportional to the force/displacement measured by the sensor, and can be set by the user using a jumper. Other parameters can be easily set, again by using jumpers. The connection is made by means of 4 detachable 3-wire terminal blocks.

Applications

  • Test benches and machines
  • Machine tools
Electronic type
Signal Conditioning
Input channels
1
Input signal type
LVDT
Analog output signal
4-20 mA, ± 10 VDC
Datalogger
no
Tension d'alimentation
10 Vcc
Protection Class
IP40
Housing
Plastic

H: 99 L: 17.5 P: 112 mm

(A/B) or (A-B)/(A+B)

Nous consulter

Related products

Rotating RVDT sensor

RV

Non-amplified 30° rotating RVDT sensor
LVDT displacement sensor

HT-1000 - Capteur LVDT 540°C

LVDT sensor ± 25.4 mm 540°C - non amplified - High temperature
conditionneur Capteur de déplacement LVDT

NTC-6000

LVDT/RVDT Signal Conditioner - DIN-Rail
High strength LVDT probe

GA-750 - Palpeur LVDT ± 50 mm

Ruggedized industrial LVDT probe - 0 to ± 50 mm - AC or DC - Analog output
Phone +33 1 46 91 93 32 Contact Contact form Newsletter S'inscrire à la newsletter