FM207 - Pinch force measurement 0-500N - 2000/4/EG
FM-207 is used to stress-test the closing of car doors (side windows, sunroof, motorized tailgate) in compliance with standard 2000/4/EG, up to 500N at a stiffness of 10N/mm.
{{ confirmMessage }}
The Axial TQ is the high-performance solution for torque measurement on test benches in R&D and production control.
FM-207 is used to stress-test the closing of car doors (side windows, sunroof, motorized tailgate) in compliance with standard 2000/4/EG, up to 500N at a stiffness of 10N/mm.
With its quick-connect hexagonal section interfaces (¼" - DIN 3126 - male/female), the DRFSk rotary torque meter can be fitted instantly to most automatic screwdrivers, measuring torque up to 20Nm, with an accuracy of less than 0.25%, and up to 10000 rpm.
DRBZ allows precise torque measurement directly on the power take-off of a tractor transmission up to 2500 Nm. Supports Type 1-3/8"-6, Type 2 1-3/8"-21 or Type 3 1-3/4"-20 spline standards.
Platform based geotechnical tiltmeters of Series 600 and 700 provide a great solution for very high-precision tilt measurements.
S508 is a compact, rugged and precise IP68 10 Bars sensor for angle measurement in applications in the energy sector (dams, hydroelectric power plants, wind turbines, nuclear power) and for monitoring structures (bridges, platforms).
New RAIL series of capacitive accelerometers is approved for use in a wide range of railway applications including vibration characterization for R&D testing and continuous monitoring applications (rail, rolling stock, catenaries, etc...)
The 9870 is a precision load cell conditioner with 24-bit conditioner and a large LCD display.
P137 is particularly suitable for OEMs looking for a highly accurate and compact displacement sensor solution that excels in arduous environments.