Force Sensors
Force sensors allow the measurement of static and dynamic loads on one or more axes. The force measurements are carried out in tension and / or in compression, over ranges from a few Newtons to several Meganewtons.
By their high measurement precision and their great robustness, these sensors are predestined for use on test benches, in industrial laboratories or for fatigue tests.
Many customization options including the calibration range, connectors and conditioning electronics are available.
High precision pancake load cells
- Ranges: ±125N to ±9000 kN
- Accuracy: ±0.02 to ±0.1%.
- Insensitive to transverse forces
- Test benches, fatigue, presses, calibration benches
S-beam load cell
- Ranges: ±250 mN to ±200 kN
- Accuracy: ±0.05% to ±0.2%.
- Compact and affordable
- Material testing, test bench, weighing, machine tools
Miniature load cells with threaded ends
- Traction/compression
- Compact, economical
- Ranges from ±1N to ±200 kN
- Tooling, test benches
Load Pins & Load Shackles
- Instrumented axes or screws
- From a few Newtons to 150 tons
- Optional with conditioning
- Lifting, traction machines
Load button load cells
- Ranges from 25N to 220 kN
- Diameter from 10 to 115mm
- IP67 RATING
- Robotics, process monitoring
Press Force Load Cells
- Ranges: 0-2kN to 0-5000kN
- Measurement of the pressing or fitting force applied by the press
- Accuracy between 0.5% and 1%
- Civil engineering, Production
Load washers
- Ranges: 0-2kN to 0-5000 kN
- Measurement of the clamping or pressing force
- Bores: M4 to M60
- Accuracy between 0.5% to 1 %
- Process, civil engineering
Bending Beam Force Sensors
- Beam construction
- Insensitive to change in point of application of force
- Capacity between 100 gr. and 100 tons (1N to 1MN)
Fatigue rated for sensors
- 1 or 3 axes
- In traction/compression
- 1 to 100 million load cycles
- IP65+ sealing
Strain sensors
- Up to 1300µm/m
- mV/V or amplified output
- Easy to install
- For agriculture, civil engineering
Bending Beam Force Sensors
- Beam construction
- Insensitive to change in point of application of force
- Capacity between 100 gr. and 100 tons (1N to 1MN)
S-beam load cell
- Ranges: ±250 mN to ±200 kN
- Accuracy: ±0.05% to ±0.2%.
- Compact and affordable
- Material testing, test bench, weighing, machine tools
Load Pins & Load Shackles
- Instrumented axes or screws
- From a few Newtons to 150 tons
- Optional with conditioning
- Lifting, traction machines
Pillow block load sensors
- Measurement of the force applied to plummer block bearings
- Loads between 1 and 100 kN
- Instrumentation of machine tools and test benches
Sealed - Stainless Steel Force transducers
- Stainless steel construction IP67 / IP68
- Ranges ±440 N to ±1350kN
- Submersible versions up to 5 Bar
Miniature force sensors
- Simple, quick and economical solution
- Small size
- Measures between 0.5N and 200kN
- Accuracy between 0.1 and 1%