Ref: A750-050

High-precision analog 1-axis inclinometer for geophysical - ± 3 to ± 90°

Single-axis inclinometer with viscous damping
Excellent cost / accuracy ratio
Measuring range: ± 3 to ± 90°.
Accuracy: 0.02 to 0.05
Zero to temperature sensitivity < 0.003 V/°.
Shock limit: 500g - Noise: 0.002 Vrms
Bandwidth: 0-5 Hz
Output signal: 0-5 Vdc
Operating temperature: -55 to +85°C
Power supply: 15Vdc to 30 Vdc
IP65 enclosure

Présentation

The Jewell Black Diamond series of precision inclinometers is a cost-effective, accurate inclination measurement solution for geotechnical monitoring applications such as bridge settlement and sway, deflection measurement, platform levelling and structural analysis. Extremely fine angle measurement is based on gravity measurement using a servo-controlled inertial platform and an optical sensor. Viscous damping of the sensitive element guarantees excellent measurement stability, even in vibratory environments. Accuracy is between 0.02% and 0.05% of full scale, depending on the measurement range, with a bandwidth of up to 5Hz and exceptional resolution of 3.5µrad. In the A750-050 version, 6 measurement ranges are available: ±3, ±14.5, ±30, ±45, ±60, ±90°.

Installation

Le montage de l'inclinomètre A750-050 sur l'application est réalisé par l'intermédiaire de 2 vis M5. La connection électrique se fait au choix via un connecteur 6-pin ou un bornier 4-pin monté sur l'inclinomètre. Des connecteurs et des cables sont disponibles en option.