Single-Axis compact Inclinometer with analog output
- 1-axis rugged servo-inclinometer
- Measuring range: ± 1 to ± 90°.
- Accuracy: 0.02 to 0.05%
- Hysteresis < 0.05% of full scale output
- Shock limit: 1500g - Vibration: 20 grms
- Output signal: ± 5 Vdc
- Operating temperature: -20 to +70°C
- small footprint - stackable
Presentation
LSRP Inclinometer is an extremely sensitive, rugged sensor designed to provide horizontal angle or vertical deviation measurements with virtually infinite resolution. These fluid-damped compact, cylindrical-shaped sensors are stackable to meet the needs of applications with space constraints while facilitating the use of several tiltmeters for multi-axis measurements
Accuracy is between 0.02% and 0.05% of full scale, depending on measurement range, with a bandwidth of up to 30Hz, exceptional resolution of 1µrad and hysteresis < 0.0005% of measurement range.
5 measurement ranges from ±1.0 to ±90.0° are available as standard. LSRP calibration on a specific measurement range is available as an option. The output signal is ± 5VDC. Temperature sensitivity is extremely low (< 0.0003V/° over the ±90.0° range), and measurement sensitivity to transverse acceleration negligible.
The design of the LSRP, whose sensitive elements are protected from shock and vibration by a fluid damping system, enables accurate, reliable measurement in the harshest industrial environments:
- operating temperature: -20 to +70°C
- shock limit: 1500g
- Vibration: 20 grms
Installation
LSRP inclinometer is mounted on the application using 4 M4 screws. Electrical connection is via 5 solder pins mounted on the inclinometer. Optional connectors and cables are available. Permissible supply voltage is between 9 and 18 VDC.
Dimensions
Applications
- Heavy Construction Grading
- Ship and Barge Leveling
- Deviation Surveys
- Continuous Casting
- Weapons Platform Leveling
- Steel Mill Ladle Position
- Oil and Gas Well Bore Mapping
- Geophysical Monitoring
- Mobile Antenna Positioning
- Technologie
- Inertial
- Number of Axis
- 1 Axis
- Etendue de mesure
- 1 / 3 / 14.5 / 30 / 90 °
- Bande passante (-3 dB)
- 1 , 2 , 15 , 20 , 40 Hz
- Application
- High Accuracy
- Nonlinearity (% FS)
- ± 0.02 , 0.05 %
- Sortie analogique
- analog (Voltage)
- Analog output signal
- ± 5 VDC
- Digital output signal
- none
- Tension d'alimentation
- ± 15 Vcc
- Protection Class
- IP65
- Housing
- Steel
Dimensions
Pining du connecteur
Les options de configuration
- choix connecteur (option C) ou bornier (option P)
- Calibration spéciale
- sortie 0-5 VDC possible
- Tension d'alimentation: 24 - 36 VdC
Modèles disponibles
- LSRP-1 à LSRP-90
- Câble
- Connecteur
- Coffret de conditionnement
- Afficheur