Ref: TL720D

Low-Cost Single-Axis MEMS Gyrometer RS-485 / CAN - 150°/s

Single-Axis MEMS Gyrometer - IP67
Gyro measurement range: ±150°/s
Accelerometer measurement range: ±4g
Interface: RS-485, ASCII or Modbus RTU, or CANbus 2.0A/B
Power supply: 5 VDC
Operating temperature: -40 to +80 °C
Zero drift: < 10°/h
Non-linearity: < 0.1% FS
Sampling rate: 100 Hz
Output signals: Azimuth, Angular Velocity Z, Longitudinal Acceleration
Shock resistance: 100g (11ms, 1/2 sine)
Dimensions: 55 x 37 x 24 mm
Weight: 152 g

Overview

The TL720D gyrometer enables single-axis angular velocity measurement with ranges up to ±150°/s and can be connected to a controller/acquisition system via RS-485, using ASCII or Modbus RTU protocol, or through CANbus. The measurement also features excellent zero stability (drift < 0.2 °/min).

Specifications

Measurement range [°/s]	150
Bandwidth	0-100Hz
Non-linearity	0.1%
Interface	RS-485 or CAN
Power supply	9-36VDC
Zero drift	10°/h
Operating temperature	-40 to +85°C

Installation and Use

The TL720D gyrometer is compact (55 x 37 x 24 mm) with high shock resistance (200g during operation) and designed for industrial use. It has a 152-gram aluminum housing with an IP67 protection rating. The power supply is 9-36V (5 VDC optional). A 2m AWG 30 shielded PUR cable is included, with optional cable length and connector configuration based on client requirements.