Ref: Tuff Tilt - 801 series

Biaxial high precision tiltmeter for cost sensitive applications - IP65 – ±0.5°, ±3°, or ±50°

  • Electrolytic tilt sensor
  • Measurement ranges: ±0.5°, ±3°, and ±50°
  • Resolution: 0.0001°, 0.0006°, or 0.01°
  • Accuracy: ±0.008°, ±0.08°, or ±0.5°
  • Available in single or dual axis
  • Rugged IP65 aluminum housing
  • Temperature output
  • Response time: 0.15 s
  • Version A801: Output signal ±5 VDC
  • Version C801: Output signal 4–20 mA
  • Version D801: Output signal RS-232/485
  • Operating temperature: -40 to +85 °C

Download the product sheet

?
Lead time : 4-8 weeks

Introduction to TUFF TILT 801

The TUFF TILT 801 precision inclinometer combines accuracy and durability at a controlled cost, for a wide range of monitoring and measurement applications.
Using a gravity-sensitive electrolytic element, the TUFF TILT 801 inclinometer provides precise, fine measurements (resolution from 0.0001° to 0.01° depending on the model) with excellent long-term stability.
Response time: 0.15 s.

The IP65-sealed aluminum housing (120 x 80 x 60 mm) is suitable for outdoor use (operating temperature: -40 to 85 °C).
In the uniaxial version, installation can be transverse or longitudinal (to be specified when ordering).
A 3 m cable is included.
Admissible supply voltage: 8–18 VDC for the voltage version, 12–29 VDC for the 4–20 mA version, and 7–28 VDC for the digital output.

A temperature output is included, allowing compensation of measurement errors due to temperature variations.

Specifications

C801-HG C801-St C801-WA A801-HG A801-St A801-WA D801-HG D801-St D801-WA
Measurement range ±0.5° ±3° ±50° ±0.5° ±3° ±50° ±0.5° ±3° ±50°
Max. resolution 2 µrad 10 µrad 200 µrad 2 µrad 10 µrad 200 µrad 2 µrad 2 µrad 40 µrad
Repeatability 4 µrad 20 µrad 350 µrad 4 µrad 20 µrad 3500 µrad 6 µrad 6 µrad 80 µrad
Non-linearity 1% 2% 0.5% 1% 2% 0.5% 0.1% 0.1% 0.1%
Output signal 4–20 mA 4–20 mA 4–20 mA ±5 VDC or ±10 VDC ±5 VDC or ±10 VDC ±5 VDC or ±10 VDC RS-232/422 RS-232/422 RS-232/422
Power supply 10–29 VDC 10–29 VDC 10–29 VDC 8–18 VDC 8–18 VDC 8–18 VDC 7–28 VDC 7–28 VDC 7–28 VDC
Zero temp. sensitivity ±0.0002°/°C ±0.0002°/°C ±0.002°/°C ±0.0002°/°C ±0.0002°/°C ±0.0002°/°C ±3.5 µrad/°C ±3.5 µrad/°C ±0.004°/°C
Gain temp. sensitivity 0.04%/°C 0.04%/°C 0.1%/°C 0.04%/°C 0.04%/°C 0.04%/°C 0.02%/°C 0.02%/°C 0.05%/°C

Applications

  • Structural monitoring
  • Infrastructure monitoring
  • Platform leveling
Technologie
Geotechnical
Number of Axis
1 Axis, 2 Axis
Etendue de mesure
0.5 / 3 / 50 °
Résolution
0.001° - 0.01°
Bande passante (-3 dB)
5 , 0.5 Hz
Application
High Accuracy, geotechnical
Nonlinearity (% FS)
± 0.5 , 1 , 2 %
Zero Balance
0.0002 %PE/°C
Sensibilité du gain
0.04 %/°C
Nonrepeatability
0.035 % FS
Sortie analogique
analog (Voltage), RS-232/422/485
Analog output signal
± 5 VDC
Digital output signal
RS-485, RS-232
Tension d'alimentation
8-18 VDC
Température de fonctionnement
-40 to 85 °C
Protection Class
IP65
Housing
Aluminium

Dimensions

Wiring diagram

Digital

Configuration

  • Special calibration
  • Temperature sensor
  • Connectivity (cable length, connector)
  • Uniaxial longitudinal, uniaxial transverse, or biaxial version
  • Output type (voltage, current, or digital)
  • Cable
  • Datalogger
  • Display
  • Controller

Mounting Accessories

  • Mounting plate for vertical installation (81439)
  • Mounting plate for horizontal installation (84051)

Related products

inclinomètre électrolytique

Tuff Tilt 850

Geotechnical MEMS Rugged Tiltmeter - analog or digital output
Inclinomètre génie civil

Model 711-2 et 716-2

High-precision geotechnical dual-axis tiltmeter
Inclinomètre géotechnique

Model 900/904 - 2 axes - IP65

Low cost precision biaxial tiltmeter for monitoring applications - ±10 à ±50°
Inclinotrack -
Phone +33 1 46 91 93 32 Contact Contact form Newsletter S'inscrire à la newsletter