Cost-effective IP67/IP68 load pin 0-5 to 0-500kN
- load pin for force / load measurement
- Standard measurement ranges: ±5kN, ±10kN, ±20kN, ±50kN, ±100kN, ±200kN (other ranges on demand)
- Non-linearity: 0.5% of full scale output
- Output signal: 1 mV/V (or optionally amplified)
- Dimensions: depending on application;
- Overload protection: 150% of nominal load
- Construction: stainless steel IP67 (IP68 in option)
- Operating temperature : -20 to 70°C
- Connection: 3 m 4-wire cable or connector
- Options: Integrated amplifier, wireless, other dimensions, other ranges, IP68...
Presentation
ALP load pin is installed in place of the original pin, and is designed to measure/monitor loads of up to 20 Tons, with a measurement accuracy of the order of 0.5 to 1% of full scale. Output signal is 1.0 mV / V excitation (5 or 10V). Overload protection is 150% of measurement range.
Specifications
Installation
The pin is fitted in place of the standard axle in the fork head and measures the tensile and compressive forces applied to the cylinder surface. It is supplied with a 3 m cable, and is compatible for outdoor use, with an IP67 stainless steel body, and an operating temperature range of -20 to + 70° C. The output signal (1.0 mV/V) can be optionally amplified.
Dimensions
Configuration options
Dimensions
measurement ranges
connectivity
submersible version
Conditioning, acquisition: Display, Conditioner or acquisition modules
Applications
- Machine tool instrumentation
- marine
- Lifting
- weighing
Related products
