Ref: KD45 - ±2Nà ±50N

Double bending beam force sensor- 2 to 50 N

  • type: double bending beam force sensor;
  • nominal force: ±2N, ±5N, ±10N, ±20N, ±50N;
  • accuracy class: 0,1 %;
  • non-linearity: 0,1%
  • Operating force limit: 400%
  • Lateral force limit : 500%
  • dimensions: 45 mm x 8 mm x 8 mm;
  • force transmission: female thread M3x0,5;
  • Bridge voltage supply : 1 to 10 VDC
  • connection: 1 m STC-31V-4;
  • material: aluminium or stainless steel (VA) IP65;
  • Operating temperature : -10 to 85°C (optional : up to 150°C)

Download the product sheet

Log in to see the price


The force sensor KD45 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3.2. There is a thread M3 for force transmission.

Force transmission is displaced parallel under loading. The force sensor tolerates displacements of force transmission and lateral forces due to its design as a double beam (lateral force limit : 500% of nominal force)

The force sensor KD45 is designed as a multi-range sensor. Available measuring ranges are : ±2N, ±5N, ±10N, ±20N, ±50N.

The accuracy of 0.1% is already reached at a nominal output of 0.5mV/V. This means that the zero point stability is 4 times higher than in a sensor with nominal output of 2mV/V. The KD45 force sensor can be used up to an output signal of 2mV/V or up to four times the specified nominal force.

Various solutions are offered for the output amplification including:

  • Indicators
  • Miniature signal amplifiers as GSV-1M


Measuring Range ±2N, ±5N, ±10N, ±20N, ±50N
Accuracy 0,1 %
Non-linearity 0,1 %
Dimensions 45 mm x 8 mm x 8 mm
Output signal 0,5mV/V
Max operating force 400%
Max lateral force 500%



  • weighting
  • Force measurement
  • Test rigs
  • Industrial scales
beam sensor
Measuring Range
±2N , ±5N , ±10N , ±20N , ±50N
Precision (max error)
≤ 0.1 %
Nonlinearity (% FS)
± 0.03 %
0.3 % FS
0.01 % FS
Temperature Compensated Range
-10 to 70 °C
Température de fonctionnement
-10 to 85 °C
Zero Balance
0.008 %PE/°C
Analog output signal
Output Signal
0.5 mV/V
Résistance du pont
350 Ω
Tension d'alimentation
10 Vcc
cable 1 m STC-31V-4
Measurement direction
0.1 mm
400 %PE
Aluminium ou Acier inoxydable
Protection Class
Measuring Range (Force)
⩽ 1 kN
High Accuracy, Miniature

  • operating temperature
  • material
  • measuring range
  • calibration


Related products

capteur de force miniature

SMA - ±60N à ±900N - miniature

Miniature S-type load cell - ±60 to ±900N
poutre de flexion


Capteur de force Poutre - 200N à 22kN - Compression
Conditionnement de mesure


In-line force transducer amplifier - 25 kHz
GSV-15KL4 - Junction box with measuring amplifier for sensors with straingages


Junction box with measuring amplifier for sensors with straingages
Phone +33 1 46 91 93 32 Contact Contact form Newsletter S'inscrire à la newsletter