Ref: GSV-1M - 1 voie - Jauge - IP67

1- channel straingauge amplifier in potting box IP67

1- channel straingauge amplifier in potting box;
connection: 2x 4-pol. connector typ 718, with necessary plugs for electrical connection;
dimensions: 55mm x 36mm x 17mm;
analog output: -5V...+5V / -10V...+10V;
limit frequency: 250Hz / 10kHz;
input sensitivity: 1 / 2 / 3,5 mV/V;
supply voltage: 11V..26V DC;
weight: 50g;
environmental protection: IP67;

Presentation

The GSV-1M amplifier is suitable with any strain gauge sensor (force, torque, pressure, etc.), mounted in full bridge, and supplied at 5VDC. The amplification gain (1mV / V, 2mV / V or 3.5mV / V), the type of output signal (voltage ± 5V or ± 10V) and the cutoff frequency of the low pass filter (250Hz, 2.5 or 10 kHz) are configured at the factory (cannot be modified).

Use

The conditioner is encapsulated in a compact steel housing and waterproof IP67. Fixing by 2 screws, the electrical connection consists of 2 M8 5-pin connectors, the temperature range is wide (-40 / + 85 ° C). The amplifier is powered with a 11-26 VDC, the sensor is powered with 5VDC. zero setting is performed by connecting a terminal to the power supply or any other 5 to 24 VDC signal. The value is stored in the EEPROM.