Low cost compact rotary torque sensor - +/-0.5 to +/-1000 Nm
- 11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm
- Compact industrial rotary torque transducer
- Output signal: ± 5 V and 10 ± 8 mA
- Accuracy : 0.5% * Output
- 12-pin connector output
- Overload protection: 100%
- Display (DRBK-A) and optional speed output (DRBK-n)
- Smooth cylindrical shaft
- Delivered with factory certificate of conformity
- Optional calibration certificate available
- Optional couplings and cables
Presentation
Series DRBK torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with speed measurement for a host of applications. The integrated signal amplifier runs on 11.5 to 30 V DC; it outputs an analog signal of 0 to ± 5 V and a current signal of 10 mA ± 8 mA. Due to its large supply voltage range the transducer can be operated directly from a PLC. The device should be used only with couplings designed specially for it.
Note: This transducer should only be used in conjunction with the specially developed couplings.
Specifications
Measuring range | 0,5-1 - 2 Nm | 5-10-20 Nm | 50-100-200 Nm | 500-1000 Nm |
---|---|---|---|---|
Output signal | ±5V, 4-20mA | ±5V, 4-20mA | ±5V, 4-20mA | ±5V, 4-20mA |
Precision | ±0,5% | ±0,5% | ±0,5% | ±0,5% |
Bandwidth [Hz] | 0-1kHz | 0-1kHz | 0-1kHz | 0-1kHz |
Speed of rotation | 20000 tr/min | 18000 tr/min | 16000 tr/min | 9000 tr/min |
Permissible overload | 100 % | 100 % | 100 % | 100 % |
Installation
Due to their compactness, the DRBK torquemeters are easily integrated into the test bench. Optional couplings are available to allow mechanical adaptation on the shaft.
Measuring range | 0,5-1 - 2 Nm | 5-10-20 Nm | 50-100-200 Nm | 500-1000 Nm |
---|---|---|---|---|
Coupling (manuel) | MK2/20/40/6/x | BKE/20/15/x | BKE/200/24/x | BKE/1000/40/x |
Applications
The DRBK torquemeters are suitable for torque/performance measurement:
- test bench for electric motors
- transmission performance measurement
- Friction torque measurement
- rotatif / statique
- rotating
- Moment capacity
- 0.5 / 1000 / 1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 Nm
- Measuring Range (Torque)
- 0.01 - 1 Nm, 1 - 10 Nm, 10 - 100 Nm, 100 - 1000 Nm
- Montage_Capteur
- shaft
- Max rotation speed
- 10000 rpm
- Nonlinearity (% FS)
- ± 0.3 %
- Hysteresis
- 0.3 % FS
- Signal otuput
- ± 5 VDC, 4-20 mA
- Sortie régime
- Oui
- Tension d'alimentation
- 10 Vcc
- Température de fonctionnement
- 0 to 60 °C
- Connecteur
- 12pin-connector
- Protection Class
- IP40
- speed output, display
Type | 0 | I | II | III |
---|---|---|---|---|
Torque Ranges: (Nm) | 0,5-1 - 2 | 5-10-20 | 50-100-200 | 500-1000 |
Dimensions: | ||||
L (mm) 66 80 90 120 | 66 | 80 | 90 | 120 |
Ø B1 (mm) 45 70 75 105 | 45 | 70 | 75 | 105 |
B2 (mm) 45 53 53 76 | 45 | 53 | 53 | 76 |
H (mm) 56 72 77,5 97,5 | 56 | 72 | 77,5 | 97,5 |
H1 ± 0,05 (mm) 18 28 30 40 | 18 | 28 | 30 | 40 |
Ø D g6 (mm) 6 15 24 40 | 6 | 15 | 24 | 40 |
L1 (mm) 42 48 52 65 | 42 | 48 | 52 | 65 |
L2 (mm) 10 15 18 26 | 10 | 15 | 18 | 26 |
A1 (mm) 33 39 42 50 | 33 | 39 | 42 | 50 |
A2 (mm) 20 31 | 20 | 31 | 35 | 55 |
M | M3 x 5 deep | M4 x 6 deep | M4 x 6 deep | M5 x 10 deep |
Weight approx.: (g) | 230 | 550 | 850 | 2450 |
Speed max: tr/min | 20000 | 18000 | 16000 | 9000 |
- Measuring range
- Speed output
- Integrated display
| Etendue de mesure | 0,5-1 - 2 Nm | 5-10-20 Nm | 50-100-200 Nm | 500-1000 Nm |
0,5-1 - 2 Nm | 5-10-20 Nm | 50-100-200 Nm | 500-1000 Nm | |
---|---|---|---|---|
Coupling (manuel) | MK2/20/40/6/x | BKE/20/15/x | BKE/200/24/x | BKE/1000/40/x |
- Cable 2.5, 5 or 10m, flying plugs, single shielded (AK12.2F) or double shielded (AK12.2DF)
- Data acquisition
- Speed signal converter --> voltage or current