Ref: KD60 - ±5Nà ±1kN

Double bending beam force sensor - 5 to 1000 N

  • type: double bending beam force sensor;
  • nominal force: ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±500N, ±1000N
  • accuracy class: 0,1 %;
  • Operating force limit: 400%
  • Lateral force limit : 500%
  • dimensions: 60 mm x 10 mm x 10 mm;
  • force transmission: female thread M5x0,8;
  • Bridge voltage supply : 1 to 10 VDC
  • connection: 1 m STC-31V-4;
  • material: aluminium or stainless steel (VA) IP65;
  • Operating temperature : -10 to 85°C (optional : up to 150°C)

Download the product sheet

?

Presentation

The force sensor KD60 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø5.3. There is a thread M5 for force transmission.

Force transmission is displaced parallel under loading. The force sensor tolerates displacements of force transmission and lateral forces due to its design as a double beam (lateral force limit : 500% of nominal force)

The force sensor KD45 is designed as a multi-range sensor. Available measuring ranges are : ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±500N, ±1000N

The accuracy of 0.1% is already reached at a nominal output of 0.5mV/V. This means that the zero point stability is 4 times higher than in a sensor with nominal output of 2mV/V. The KD60 force sensor can be used up to an output signal of 2mV/V or up to four times the specified nominal force.

Various solutions are offered for the output amplification including:

  • Indicators
  • Miniature signal amplifiers as GSV-1M

Specifications

Measuring Range ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±500N, ±1000N
Accuracy 0,1 %
Non-linearity 0,1 %
Dimensions 45 mm x 8 mm x 8 mm
Output signal 0,5mV/V
Max operating force 400%
Max lateral force 500%

Dimensions

Applications

  • weighting
  • Force measurement
  • Test rigs
  • Industrial scales
Type
beam sensor
Measuring Range
±5N , ±10N , ±20N , ±50N , ±100N , ±200N , ±500N , ±1000N
Precision (max error)
≤ 0.1 %
Nonlinearity (% FS)
± 0.03 %
Hysteresis
0.3 % FS
Nonrepeatability
0.01 % FS
Temperature Compensated Range
-10 to 70 °C
Température de fonctionnement
-10 to 85 °C
Zero Balance
0.008 %PE/°C
Analog output signal
non-amplifié
Output Signal
0.5 mV/V
Résistance du pont
350 Ω
Tension d'alimentation
10 Vcc
Cable
cable 1 m STC-31V-4
Measurement direction
Flexion
Déflection
0.1 mm
Surcharge
400 %PE
Aluminium ou Acier inoxydable
Protection Class
IP65
Measuring Range (Force)
⩽ 1 kN, 1 - 100 kN
Application
High Accuracy, low cost, Miniature

  • operating temperature
  • material
  • measuring range
  • calibration

Instrumentation

Related products

Poutre de flexion

MB

Capteur de force Poutre 1.1 kN
poutre de flexion

SSB

Capteur de force Poutre - 200N à 22kN - Compression
Conditionnement de mesure

GSV-6K

Conditionneur - 1 entrée pont de jauges - Sortie CANopen
Double bending beam force sensor

KD45 - ±2Nà ±50N

Double bending beam force sensor- 2 to 50 N
Phone +33 1 46 91 93 32