Ref: KD78 - ±500mN

Double bending beam force sensor - ±500mN - high resolution

  • type: double bending beam force sensor;
  • nominal force: ±500 mN
  • accuracy class: 0,1 %;
  • Output signal : 1.2 mV/V
  • Operating force limit: 200%
  • Lateral force limit : 100%
  • dimensions: 78 mm x 8 mm x 23 mm
  • force transmission: 2 x female thread M2.5 x 0.45;
  • Bridge voltage supply : 1 to 10 VDC
  • connection: 2 m STC-31V-4;
  • material: Aluminium alloy, gold anodized IP65;
  • Operating temperature : -10 to 85°C

Download the product sheet

?

Presentation

The Force sensor KD78 0.5N incorporates an overload protection, which allows a maximum load of about ±1N.

The force sensor KD78 0.5N is especially well-suited for the measurements of low forces in the range of millinewtons. The natural frequency of this sensor ranges between 300Hz and 400Hz.

Specifications

Measuring Range ±500 mN
Accuracy 0,1 %
Non-linearity 0,1 %
Dimensions 78 mm x 8 mm x 23 mm
Output signal 1,2mV/V
Max operating force 200%
Max lateral force 100%

Dimensions

Signal conditionning

Various solutions are offered for the output amplification including:

  • Indicators
  • Miniature signal amplifiers as GSV-1M

Applications

  • weighting
  • Force measurement
  • Test rigs
  • Industrial scales
Type
beam sensor
Measuring Range
±500mN
Precision (max error)
≤ 0.1 %
Nonlinearity (% FS)
± 0.02 %
Hysteresis
0.02 % FS
Nonrepeatability
0.01 % FS
Temperature Compensated Range
-10 to 70 °C
Température de fonctionnement
-10 to 85 °C
Zero Balance
0.008 %PE/°C
Analog output signal
non-amplifié
Output Signal
1.2 mV/V
Résistance du pont
350 Ω
Tension d'alimentation
10 Vcc
Cable
cable 1 m STC-31V-4
Measurement direction
Flexion
Déflection
0.25 mm
Surcharge
400 %PE
Aluminium ou Acier inoxydable
Protection Class
IP65
Measuring Range (Force)
⩽ 1 kN
Application
High Accuracy, low cost

  • operating temperature
  • material
  • measuring range
  • calibration

Instrumentation

Related products

Poutre de flexion

MB

Capteur de force Poutre 1.1 kN
Conditionnement de mesure

GSV-6K

Conditionneur - 1 entrée pont de jauges - Sortie CANopen
Double bending beam force sensor

KD45 - ±2Nà ±50N

Double bending beam force sensor- 2 to 50 N
GSV-15KL4 - Junction box with measuring amplifier for sensors with straingages

GSV-15KL4

Junction box with measuring amplifier for sensors with straingages
Phone +33 1 46 91 93 32