Ref: LIPS X112 / E112 / M112

Gauge Head Position Sensor - 0-50 mm - ATEX

Type : Non-contact rod displacement sensor, stand alone
ATEX versionof P112 sensor
Designed for gauge head positioning
Measuring range : 0-5 to 0-50 mm
Non-linearity : 0.25% FS - 0.1% optional for ranges between 10 and 50 mm
Bandwidth : 0-10 kHz
Output signal : 0.5-4.5V dc ratiometric
Spring loaded plunger with a dome end
MTBF : 350,000 hrs at 40°C
Axial output connector or cable
Mounting : threaded rod or ball joint
Operating temperature : -40°C to 80°C
Construction : Stainless steel
Protection : IP 67
Diameter: 19 mm
Use of Galvanic Isolation Amplifier mandatory

Introduction

The LIPS X112 | E112 | M112 | G112 | H112 is a range of inductive linear displacement transducers designed for gauge head positioning in industrial and scientific applications. These are ATEX versions of the P112 transducer.

Positek ATEX sensors must be used with a galvanic barrier to meet intrinsic safety requirements. The X005 barrier is specially designed for Positek sensors, making it the ideal choice. Various configuration options are available for the output signal.

)

ATEX version / Intrinsic safety

Model X112: Intrinsically safe for gases -> Ex II 1G
Model E112 : Intrinsically safe for gas and dust -> Ex II 1GD
Model M112: Intrinsically safe for mining -> Ex I/II M1/GD *
Model G112: Intrinsically safe for gases -> Class I, Zone 0 Ex ia / AEx ia
Model H112: Intrinsically safe for gas and dust -> Class I, Zone 0 Ex ia / AEx ia