Ref: LIPS X111 | E111 | M111

Ruggedized displacement sensor - 0 to 800 mm - IP67 - ATEX

Type : Non-contact rod displacement sensor, stand alone
Ruggedized and ATEX version of the P101 (ATEX version of theP111)
High vibration resistance
Measuring range : 0-5 to 0-800 mm
Non-linearity: 0.25% for ranges below 450 mm - 0.5% for ranges above 450 mm - Optional 0.1% for ranges between 10 and 400 mm
Bandwidth : 0-10 kHz
Output signal : ratiometric 0,5-4,5 VDC
MTBF : 350,000 hrs at 40°C
Axial output connector or cable
Mounting : threaded rod or ball joint
Operating temperature : -40 °C to 80 °C
Construction : Stainless steel
Protection : IP 65/67
Diameter: 35mm
Use of Galvanic Isolation Amplifier mandatory

Introduction

The LIPS X111 | E111 | M111 | G111 | H11 is a range of precise, robust inductive linear displacement transducers for harsh industrial applications. A ruggedized and ATEX version of the P101 (ATEX version of the P111), the transducer features a reinforced 12.6mm diameter shaft for enhanced vibration resistance and excellent service life (MTBF > 350,000 hours).

Positek ATEX sensors must be used with a galvanic barrier to meet intrinsic safety requirements. The X005 barrier is specially designed for Positek sensors, making it the ideal choice. Various configuration options are available for the output signal.

ATEX version / Intrinsic safety

Model X111: Intrinsically safe for gases -> Ex II 1G
Model E111 : Intrinsically safe for gas and dust -> Ex II 1GD
Model M111: Intrinsically safe for mining -> Ex I/II M1/GD *
Model G111: Intrinsically safe for gases -> Class I, Zone 0 Ex ia / AEx ia
Model H111: Intrinsically safe for gas and dust -> Class I, Zone 0 Ex ia / AEx ia