Ref: LIPS X114 / E114 / M114

Submersible linear displacement sensor 100m - 0 to 800mm

Inductive linear displacement sensor
ATEX version of the S114 sensor
IP68 Immersible 10 bar (depth: 100m)
Measuring range: 0-5 to 0-800 mm
Linearity : 0,25% FS (range 0 to 450 mm) - 0,5% FS (range 450-800mm) - Option : 0,1% FS (only for ranges between 10 and 400 mm)
Output signal: 0.5 - 4.5VDC ratiometric
Construction: 316 stainless steel
Mounting: Body: M5 ball joint or flange. Moving part: M5 ball or M5 thread. Probe option up to 300mm
Connection: axial or radial cable outlet
Bandwidth: 0-10 kHz
Body diameter: 35mm
MTBF : 350,000 hrs at 40°C
Use of Galvanic Isolation Amplifier mandatory

Introduction

The LIPS X114 | E114 | M114 | G114 | H114 range of inductive linear displacement transducers is the ATEX version of the S114. It is therefore also the IP68 waterproof, 10 bar submersible and ATEX version of the P101 sensor. It is also derived from the X101 (with submersible specs). It measures displacements of up to 800mm at depths of up to 100 m, with accuracy better than 0.5%, 10kHz bandwidth and virtually infinite resolution. The measurement range is customizable between 0-5 mm and 0-800 mm in 1 mm increments. The output signal is perfectly linear with displacement.

Positek ATEX sensors must be used with a galvanic barrier to meet intrinsic safety requirements. The X005 barrier is specially designed for Positek sensors, making it the ideal choice. Various configuration options are available for the output signal.

ATEX version / Intrinsic safety

Model X114: Intrinsically safe for gases -> Ex II 1G
Model E114 : Intrinsically safe for gas and dust -> Ex II 1GD
Model M114: Intrinsically safe for mining -> Ex I/II M1/GD *
Model G114: Intrinsically safe for gases -> Class I, Zone 0 Ex ia / AEx ia
Model H114: Intrinsically safe for gas and dust -> Class I, Zone 0 Ex ia / AEx ia