Ref: ZX-HM - ZX-PA

Miniature cable displacement sensor - 0 to 38 mm - Analogue output

  • Miniature cable linear position sensor
  • Measuring range: 38mm
  • Dimensions: 18.5 x 18.5 x 9.53mm
  • Weight: 12g
  • Linearity: ± 1% Full Scale
  • Construction: Anodised aluminium
  • Temperature: -67°F to 212°F
  • Lifetime: 30,000,000 complete cycles
  • Frequency response: 25 Hz

Download the product sheet

?

Introduction

The ZX-HM and ZX-PA wire rope displacement transducers convert wire rope elongation into an electrical signal, either via the Hall effect (ZX-HM) or via a potentiometer (ZX-PA). The lifetime is between 10 and 30 million cycles depending on the model. With a measurement range of 38mm and ultra small dimensions, these sensors are ideal for precision position/displacement measurement where space is limited. The operating temperature (-40°F to 212°F) and long life make them the solution of choice for a variety of long-term applications.

Specifications

ZX-HM ZX-PA
measuring range 38 mm 38 mm
Resolution 0.04 mm infinie
Measurement principle Hall effect Potentiometric
Lifetime 30 millions 10 millions
Supply voltage 5.00 ± 0.25 VDC 1 - 30 VDC
Output signal 89% ± 3% of supply voltage 24.8 mV/mm x Supply voltage
Operating temperature -40°F to 212°F -67°F to 212°F
Bande passante 25 Hz 25 Hz
Poids 15 g 12 g

Installation

The measurement can be offset by cable extensions. The sensor body and the cable can be attached to either the fixed or mobile part of the measurement. The housing, which includes two screws, is made of anodised aluminium, the cable (optional) of nylon and steel. The end of the cable can be customised to facilitate integration into the desired application.

Applications

The ZX-HM and ZX-PA sensors are recommended for :

  • integration in limited spaces, applications that require a very small sensor
  • automotive, speed and acceleration testing
  • Suspension travel measurements
  • any other industrial application (test bench, lifting, handling) or robotics
Technologie
Wire rope Position
Etendue de mesure linéaire
38 mm
Measuring range
0 à ±50 mm
Nonrepeatability
0.0032 % FS
Nonlinearity (% FS)
± 1 %
Hysteresis
0.2 % FS
Bande passante (-3 dB)
25 Hz
Analog output signal
0-10 VDC, non-amplifié
Protection Class
IP40
Tension d'alimentation
10 Vcc
Poids
0.15
Housing
Aluminium
  • 18.54mm X 18.54 X 12.70mm
  • Cable with nylon protection
  • Reduction of the cable tension
  • Increased cable tension
  • Protection against dust intrusion
  • Potentiometer on request
  • Inverted output signal
  • Electrical connection by soldering pins
  • Cable extension
  • Display
  • Electrical cable
  • Calibration
  • Wiring

Related products

Conditionneur Afficheur universel

TRA 220

Conditioner Universal display 1 analog channel (Vcc, Tc, Ma, mV ...) - output RS-485
capteur  à câble

JX-PA

Capteur de déplacement à câble potentiométrique
capteur potentiométrique à câble Seie HX

HX Series

Capteur potentiométrique à câble sortie 5vcc
Phone +33 1 46 91 93 32