Ref: PMI 520 AJ

1-channel analog amplifier for strain gage bridge

  • 1-channel precision amplifier for strain gage full bridge
  • Accuracy : 0,01%
  • Input signal: 0.1 to 30 mV/V
  • Signal output: ± 10 Vdc or 4-20mA
  • Voltage supply - 18 - 36 Vdc
  • Bridge supply: 5 or 10 Vdc
  • Bandwidth: up to 20 kHz
  • Max. noise: < 3 µVdc RMS
  • Installation : Rail din
  • Setup - through potentiometers and jumpers

Download the product sheet

Connectez-vous à votre compte pour afficher les prix
Se connecter
?

Presentation

New-generation board for the signal conditioning of strain-gage based load cells. Fully adjustable via front-panel potentiometers:

  • Sensitivity range: 0.1 to 30 mV/V (set by push-button)
  • Adjustable gain
  • Offset
  • Output type (voltage or current)

The board features a front-panel button for generating a fixed calibration notch (shunt). The board is supplied with 18-36 VDC, and supplies the strain gage bridge with 5 or 10V.

This DIN-format board supplies power to the sensor and delivers a voltage or current signal.

All connections are made via the screw terminal block on the front panel.

Dimensions: H: 99 W: 17.5 D: 112 mm

Application

  • Force measurement
  • Torque measurement
  • Pressure measurement
Electronic type
Signal Conditioning
Input channels
1
Input signal type
SG bridge
Analog output signal
± 5 VDC
Datalogger
no
Tension d'alimentation
10 Vcc
Protection Class
IP40
Housing
Plastic

H: 99 L: 17.5 P: 112 mm

1/4 bridge

Enclosure

Related products

GSV-1A4 - 4-channel strain-gage amplifier

GSV-1A4

4-channel strain-gage amplifier
GSV-1H - 1- channel straingauge amplifier in DIN rail housing

GSV-1H

1- channel straingauge amplifier in DIN rail housing
Conditionneur capteur de force IP67

GSV-1M - 1 voie - Jauge - IP67

1- channel straingauge amplifier in potting box IP67
GSV-3USB - 1-channel analog I/O module - USB interface

GSV-3USB

1-channel analog I/O module - USB interface
Phone +33 1 46 91 93 32 Contact Contact form Newsletter S'inscrire à la newsletter