High-precision self-Leveling Borehole Tiltmeter for geotechnical applications
- Geophysical biaxial inclinometer
- Measurement range: ±330 µrad
- ±10° leveling range for easy downhole installation
- Resolution up to 5 nanoradians
- Fully submersible to 200 Bar (Titanium available for 350 Bar)
- Power supply: 7–26 VDC – 30 mA
- Signal format: SIM-NMEA (configurable)
- PC reading software: ZAGI II
- Output signal: RS-232 or RS-422
- Operating temperature: -20 to +85 °C
Overview
The LILY Series (500 Series) ultra-high precision inclinometers are designed for geophysical monitoring applications such as volcano observation, seismology, hydraulic fracturing, and borehole measurements.
These inclinometers consist of two sensing elements (X, Y) integrated into a stainless steel or titanium sealed housing (51 mm diameter), capable of withstanding pressures up to 350 bar.
In addition to their exceptional accuracy (resolution: 5 nanoradians, measuring range: ±330 µrad), these sensors are distinguished by unmatched repeatability thanks to an automatic leveling mechanism.
The LILY inclinometer is available with RS-232 or RS-485 interface.
Sampling frequency is configurable (from 10 Hz to one reading per day).
Data can be collected continuously or stored on internal memory (2 MB for up to 64,000 readings) for autonomous operation.
Each data record includes GPS position, timestamp (internal clock), and angle values.
Specifications
Parameter | Specification |
---|---|
Measurement range (biaxial) | ±330 µrad dynamic |
Resolution | 5 nanoradians |
Output | RS-232, RS-422, or both; full duplex |
Temperature range | -20 to +85 °C |
Power supply | 7–28 VDC @ 30 mA (< 10 mA in sleep mode) |
Dimensions | Ø51 mm x 915 mm |
Housing | Stainless steel (rated to 3,000 psi) or titanium (rated to 5,000 psi) |
Installation
LILY inclinometers are installed underground (up to 3,500 m) or submerged (200 to 350 bar).
Electrical connection is made via a 6-pin terminal block or a 6-pin connector mounted on the inclinometer.
Optional connectors and cables are available.
Admissible supply voltage: 7 to 28 VDC.
Applications
LILY inclinometers are particularly suited for monitoring the following applications:
- Volcanoes
- Seismic activity
- Oil and gas wells
- Technologie
- Geotechnical
- Number of Axis
- 2 Axis
- Etendue de mesure
- 0.019 °
- Résolution
- < 0.000001°
- Bande passante (-3 dB)
- 1 Hz
- Application
- High Accuracy, geotechnical
- Nonlinearity (% FS)
- ± 0.2 %
- Sortie analogique
- RS-232/422/485
- Analog output signal
- aucune
- Digital output signal
- RS-485
- Tension d'alimentation
- 10 Vcc
- Protection Class
- IP65
- Housing
- Steel
- diametre: 51 mm
- longueur: 1068.4 mm
- Special calibration
- Titanium housing
- Cable
- Datalogger
Related products

Model A601-2

Model A701-2(4X) / D701
