Cable displacement sensor - 50 mm to 2 m
- Type: Precision cable potentiometer
- Output signal: ratiometric, 4-20 mA, voltage or digital (TTL in quadrature)
- Measurement range: 50mm to 2000mm
- Repeatability: ±0.02% Full Scale
- Construction: Thermoplastic
- Protection: IP 52 or IP 65
- Lifetime: 250 000 to 2 000 000 cycles
Introduction
The JX cable transducer series is a cost-effective solution for linear position measurement in medium-duty applications. The measuring signal is derived from the cable extension via a potentiometer. 13 measuring ranges are available from 50 mm to 2000 mm. The IP52 thermoplastic housing is resistant to corrosive media. The IP-65 option provides additional protection against splashing water or oil. The sensor also incorporates a cable cleaning device to prevent debris from entering the sensor when it is retracted.
Four types of output signals are available: ratiometric, 4-20 mA, voltage or digital (TTL quadrature). The electrical interface is customizable (cable or connector, position). Some models offer manual adjustment of zero and gain, facilitating integration with the acquisition system and post-processing.
Specifications
Specification | JX-PA | JX-P420 | JX-P510 | JX-EP |
---|---|---|---|---|
Principe de mesure | Potentiomètre | Potentiomètre | Potentiomètre | Codeur angulaire |
étendue de mesure | 50 / 70 / 96 / 120 / 250 / 390 / 500 / 640 / 750 / 1000 / 1250 / 1500 / 2000 mm | 50 / 70 / 96 / 120 / 250 / 390 / 500 / 640 / 750 / 1000 / 1250 / 1500 / 2000 mm | 50 / 70 / 96 / 120 / 250 / 390 / 500 / 640 / 750 / 1000 / 1250 / 1500 / 2000 mm | 50 / 70 / 96 / 120 / 250 / 390 / 500 / 640 / 750 / 1000 / 1250 / 1500 / 2000 mm |
Signal de sortie | 92-98% de l'alimentation | 4-20 mA | 0-5, +/-5, 0-10,+/-10Vcc | 2 créneaux TTL/quadrature |
Résolution | infinie | infinie | infinie | 50 à 200µm |
non-linéarité | 0,25% | 1,00% | 0,30% | 0,10% |
Durée de vie (cycles) | 250k à 2.000k | 500k à 1000k | 250k à 2.000k | NA |
Tension d'alimentation | 1 - 30 VDC | 9 to 35 VDC | 4,9 to 30 VDC | +5 VDC ±5% ou 5-28 VDC |
Température de fonctionnement | -40° C à 95° C | -40° C à 95° C | -40° C à 95° C | -40° C à 70° C |
Gain / zero réglables | NON | OUI | OUI | OUI |
Installation
The cable is directly or indirectly linked to the displacement to be measured, which allows a non-normal or non-linear displacement. The measurement can be offset by cable extensions or pulleys. The cable sensor is not necessarily aligned with the displacement. The sensor body and the cable can be fixed on the fixed or mobile part of the measurement. The mounting is done by means of two screws on the sensor body.
Applications
The JX series of cable sensors is recommended for :
- Measuring travel on suspensions
- Level measurement
- OEM development projects
- Machine monitoring
- any other industrial application with environmental constraints
- Technologie
- Wire rope Position
- Etendue de mesure linéaire
- 1250 / 2000 / 50 / 70 / 96 / 120 / 250 / 390 / 500 / 640 / 750 / 1500 / 1000 mm
- Measuring range
- ±51 à ±250 mm, ± 251 à ±2 m, ≥ ±2m
- Nonrepeatability
- 0.02 % FS
- Nonlinearity (% FS)
- ± 1 , 0.25 , 0.5 %
- Signal otuput
- 0-5 VDC, 0-10VDC, ± 5 VDC, ± 10 VDC, 4-20 mA, TTL
- Analog output signal
- 0-10 VDC, 0-5 VDC, ± 5 VDC, 4-20 mA, ± 10 VDC
- Température de fonctionnement
- -25 to 75 °C
- Protection Class
- IP52, IP65
- Housing
- Plastic
- Application
- OEM
57.15mm X 28.5mm 71.6mm X 7.9 mm
Type d'option | Spécifications disponibles |
---|---|
Etendue de mesure | 50mm / 70mm / 96mm / 120mm / 250mm / 390mm / 500mm / 640mm / 750mm / 1000mm / 1250mm / 2000mm |
Prestations | Calibration / Câblage |
Classe de protection IP | IP 65 : étanchéité, protection contre les débris, résistance vibratoire (1G - max 0,1 sec.) et aux choics (50G) |
Longueur du câble électrique | 1m à 5m |
Connecteur câble application (Mating) | Livré sans ou avec |
Modifications / Ajouts | Réduction ou Augmentation de la tension à câble / Essuie glasse |
Type d'accroche du câble | Anneau percé / Attaches |
- Display
- Electrical cable
- Calibration
- Wiring