2-channel analog I/O module - USB interface
- 2 - channel straingauge amplifier in aluminum housing;
- Supported input channel type: strain gage, LVDT, potentiometric, encoder, frequency, 0-10VDC and 4-20 mA (configuration at the factory)
- connection: plug connector;
- dimensions: 126 mm x 85 mm x 25 mm;
- input sensitivity: 2 / 3,5 / 10 mV/V;
- interface: 1x USB port, 2x 5pol. circular connectors series 763;
- limiting frequency: 1250 Hz;
- supply voltage: 4,5 V...5.5 V DC;
- resolution: 16 Bit;
- weight: 204 g;
- environmental protection: IP40;
Description
GSV-3USBx2 is a compact and performant data acquisition module with USB port for two analog channels:
- Force, Torque, Pressure or any other Strain Gauge Bridge based Sensor.
- Full or half strain gauge bridge with 120/350/1000 Ohm resistors
- Displacement transducer
- SIgnal frequency (rpm, angle encoder, counter)
- any amplified sensor - output 0-10 V or 4-20 mA
The GSV-3USBx2 module is equipped with a 16-bit analog/digital converter. The sampling rate can be up to 1 kHz.
Installation
Thanks to its compact dimensions (126 mm x 85 mm x 25 mm), the GSV-3USBx2 can be quickly installed in the application. The sensors are connected via two M12 connectors. The aluminum housing is IP40. The operating temperature range is extended - 10/+65°C. The module is powered over USB.
Software environment
A Windows software is provided for the module configuration, the measurements visualisation and acquisition. SDK are provided as well for used-specific applications in C/C++ or Labview (WIndows DLL, VI files and protocol documentation are provided)
Applications
Force measurement on test bench, in lab or on vehicle Torque measurement on test bench or in lab
- Electronic type
- Signal Conditioning, Acquisition system
- Input channels
- 2
- Input signal type
- SG bridge, LVDT, Voltage (0-10 VDC), frequency, Current (4-20 mA)
- Application
- Miniature, DAQ universel
- Analog output signal
- ± 5 VDC
- Digital output signal
- USB
- Datalogger
- no
- Tension d'alimentation
- 5 Vcc
- Connecteur
- 2 x M12 5 pins
- Protection Class
- IP40
- Remarque
- Type d'entrées configurables
- Housing
- Aluminium
- Dimensions : 126 mm x 85 mm x 25 mm;
- Cablage d'un capteur
- Support de fixation
- Connectique