Ref: AT101

Thrust + torsion transducer (Fz + Mz) | 0.5kn/5Nm to 2kN/50Nm

Simultaneous measurement of thrust and torsion
Fz measurement range: ±500N to ± 20 kN
Measuring range Mz: 5Nm to 50 Nm
Non-linearity: ±0.3% - Repeatability: ± 0.2
Installation: 2 M8 threaded flanges
Connection: connector output
Low deflection
Temperature sensitivity < 0.02% / °C Overload protection: 150% * Output signal
Output signal: 1 mV/V
Operating temperature : -15 to 55°C

Overview

Fz+Mz strain transducer

The AT101 strain gauge load cell simultaneously measures axial force (Fz) and torsion (Mz). Thanks to a design that is not sensitive to transverse loads, this load cell is particularly well suited to applications, machines and test benches using hydraulic, pneumatic or electric actuators. Force measurement ranges from ±500N to ±20 kN, and from 5 Nm to 50Nm for torsion.

Accuracy is ± 0.5% of full scale, overload protection 150%. Operating temperature is -15 to 55°C. Calibration is temperature-compensated between -10 and 45°C.

Installation

Bridge power supply: 2-12 VDC. Installation made using M8 metric screws.

Dimensions

±500N/5Nm to ± 2kN/50Nm	20kn/20Nm

Signal conditioning and acquisition

The AT101 sensor output signal is unamplified. We complete, wire and configure the measurement chain specifically for your application by integrating a Display, a Voltage or current output analog conditioner/amplifier, or a PC acquisition module such as the GSV-3USBx2, acquisition module for 2 axes for PC, PC acquisition software supplied.