Miniature S-type force transducer - high precision - ±50N to ±5kN

Overview

The SM S-type force transducer measures tensile or compressive forces up to 5 kN, with a minimal footprint (width < 50 mm, height < 63mm) and an accuracy better than 0.1% of the measurement range. The SM load cell is available in 7 ranges (±50, ±100, ±200, ±500, ±1000, ±2000, ±5000 N), and includes an overload protection of 150%.

Specifications

Application

The sensor is mounted with 2 M6 or M12 threads on either side. The SM sensor is supplied with a 2m cable, and the operating temperature range is -55 to +90°C.

Signal conditionning and acquisition

The SM S-type load cell is supplied from 2.5 to 10 Vdc. Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Refer also to selection below:

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface

Applications

• Production quality control
• Material resistance testing
• Simple breaking force measurement
• Model and sample testing
• Weighing
• Machine tool instrumentation, test benches
• Wind tunnel

• Standardized outputs
• TEDS
• Cable connector for data acquisition
• Extended temperature compensation
• Conditioning and acquisition electronics
• Cable output on request
• 5-point calibration report

• Display
• Data acquisition module