Ref: SSM / SSM2 - ±200N à ±50kN

S-type load cell - ±200N to ±50kN - IP67

S-beam tension/compression force transducer
Measuring range: ±200N/±500N/±700N/±1kN/±2kN/±5kN/±10kN/±20kN/±25kN/±50 kN
Non-linearity: 0.05 % FSO
IP67 waterproof design
Temperature sensitivity: 0.0015 %/°C
Low drift: 0.025% (20 minutes)
Operating temperature : -55 to 90°C
Signal output : 3 mV/V
Metric thread
3 m cable output as standard
Optional signal conditioning

High-precision waterproof S-type load cell

SSM and SSM2 S-type transducers are compact, high-precision force transducers for measuring tensile and compressive forces. Non-linearity is 0.05%, non-repeatability 0.02% and zero sensitivity < ±0.0015%/°C.

10 measuring ranges are available: 0 to 200N, 0 to 500N, 0 to 700N, 0 to 1kN, 0 to 2kN, 0 to 5kN, 0 to 10kN, 0 to 20kN, 0 to 25kN and 0 to 50 kN. Overload capacity is 150%.

Natural frequencies range from 1.5 to 3kHz depending on the model, and deflection is less than 150µm.

Specifications

Installation

The force is applied via 2 M6 or M12 threads on either side of the transducer. SSM and SSM2 are supplied with a 3m cable, and the operating temperature range is -55 to +90°C. The sensor body, in aluminum or stainless steel depending on the measuring range, is IP67 waterproof.

Dimensions

Rod-end bearings

Signal conditioning and acquisition

SSM S-type load cell requires a voltage supply comprised between 2.5 and 10VDC.

Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Refer also to selection below:

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface

Applications

Force measurement on test machines
Quality control in production
Material control
Strength of materials testing
Simple breaking force measurement
Model testing

Type: S-beam
Measuring Range: ±200N , ±500N , ±700N , ±1kN , ±2kN , ±5kN , ±10kN , ±20kN , ±25kN , ±50kN
Precision (max error): ≤ 0.1 %
Nonlinearity (% FS): ± 0.05 %
Hysteresis: 0.03 % FS
Nonrepeatability: 0.02 % FS
Temperature Compensated Range: -15 to 65 °C
Température de fonctionnement: -55 to 90 °C
Zero Balance: 0.0027 %PE/°C
Analog output signal: non-amplifié
Output Signal: 3 mV/V
Résistance du pont: 350 Ω
Tension d'alimentation: 10 Vcc
Measurement direction: Traction & Compress.
Déflection: 0.08 / 0.12 / 0.15 mm
Surcharge: 150 %PE
Housing: Aluminium
Protection Class: IP66
Measuring Range (Force): ⩽ 1 kN, 1 - 100 kN, 100 - 250 kN
Application: High Accuracy, OEM