Ref: KD40s - IP65 - ±2N à ±5kN

S-Beam force transducer- ±2N to ±5kN - IP65

type: s-form force sensor;
nominal force: ±2N, ±5N, ±10N, ±20N, ±50N, ±100N , ±200N , ±500N, ±1kN, ±2kN, ±1kN, ±2kN, ±5kN;
accuracy class: 0,1 %;
dimensions: 40 mm x 30 mm x 10 mm / 40 mm x 34 mm x 10 mm;
force transmission: 2 x female thread M5x0,8 / M6x1;
connection: 3m ME-SYSTEME.DE / 24-4 PUR;
material: aluminum alloy / stainless steel;
weight: 35 g;

Introduction

The force sensor KD40S is very well suited for testing tasks in quality assurance as well as in materials testing due to its compact construction. Inward and outward force transmission are arranged centrically.

The force sensors KD40S up to 100N are constructed as multi-range sensors. The accuracy of 0.1% is already reached at an rated output of 0.5 mV/V. This means that the zero-point stability is 4 times higher than in a sensor with the nominal output of 2 mV/V. The force sensor KD40S can be used up to an output signal of 2 mV/V or four times the specified nominal force.

The force sensor KD40S (up to 100 N) should be installed in such way that the outgoing cables are assigned to the immobile side of the measuring construction. Thus forces from the connecting cable do not have an influence on measurement results. From 500N upwards the force sensors KD40s have a nominal rated output of 1.0mV/V. They can safely be overloaded up to 1.5x their nominal force. The cable output can be found in the middle of the two force transmission beams. For force transfer there exists one thread M5 (up to 100N) and M6 (from 500N) in the top and bottom side of the force sensor.

Additionally there is a thread M6 (from 500N) that can be used as anti-twist protection. The force sensor from a nominal force of 1000N has a height of 34 mm.

Signal conditionning and acquisition

KD40s S-beam load cell requires an excitation voltage comrised between 2.5 and 5 Vdc. Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Refer also to selection below:

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface

Applications

Material testing
Quality assurance
Process monitoring

Type: S-beam
Measuring Range: ±2N , ±5N , ±10N , ±20N , ±50N , ±100N , ±200N , ±500N , ±1kN , ±2kN
Precision (max error): ≤ 0.1 %
Nonlinearity (% FS): ± 0.02 %
Hysteresis: 0.02 % FS
Nonrepeatability: 0.1 % FS
Temperature Compensated Range: -10 to 70 °C
Température de fonctionnement: -10 to 85 °C
Zero Balance: 0.02 %PE/°C
Sensibilité du gain: 0.01 %/°C
Analog output signal: non-amplifié
Output Signal: 1 , 0.5 mV/V
Résistance du pont: 350 Ω
Tension d'alimentation: 2.5 - 5 VDC
Measurement direction: Traction & Compress.
Déflection: 0.2 mm
Surcharge: 400 %PE
Protection Class: IP65
Measuring Range (Force): ⩽ 1 kN, 1 - 100 kN
Application: High Accuracy, OEM

40 mm x 30 mm x 10 mm / 40 mm x 34 mm x 10 mm;

Connector on cable for acquisition
Extended temperature compensation
Packaging and acquisition electronics
Connector output on request
TEDS module

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface