Ref: SMTM - ±20 à ±200N - miniature

Miniature S-beam force transducer - ±20 to ±200N, Overload protection: 10x

Miniature S-shaped force transducer
Application: Tension/Compression
Measuring range: ±20N, ±100N, ±200N
Dimensions: 19.1 X 17.3 X 7.3 mm
Non-linearity: ±0.1% PE
Overload protection: 10x
Operating temperature : -50 to 95°C
Gain sensitivity to temperature: 0.018 %PE/°C
Low drift: 0.025% (20 minutes)
Installation: 2 M3 threads
Cable outlet 1.5m

Usual Lead time : 4-6 weeks

Presentation

SMTM is a very small S-type load cell available in capacities ranging from ±20 to ±200 N . SMTM S-type load cell measures compressive or tensile loads in a minimal footprint (height 19.1mm). Measurement accuracy is 0.15% of full scale output, the output sensitivity is 2 mV/V.

Specifications

Measurement ranges [N]	±20N, ±100N, ±200N
Accuracy	0.15%
Output signal	2 mV/V
Power supply	1 to 15 VDC (5 V recommended)
Construction	Aluminum or steel
Operating temperature range	-50 to 95°C
Connectics	4-wire cable output, 1.5m long, without connector
Dimensions	17.3 x 19.1 x 7.3 mm

Installation

The force is applied via an M3 thread on either side of the transducer. SMTM sensor is supplied with a 1.5m cable, and has an operating temperature range of -50 to +95°C.

Dimensions

Signal conditioning and acquisition

The SMTM S-type load cell requires a voltage supply comprised between 2.5 and 10VDC.

Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Refer also to selection below:

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface