Ref: CS84 - Pdiff ATEX

ATEX differential pressure sensor - ±70 mbar to ± 3.5 bar - 0.5% accuracy

Measuring range: +/-70mbar to +/-20 bar
Type of measurement: differential, bidirectional
ATEX : Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
Accuracy: ±0.25 %, ±0.50 %
Output signal: 4-20mA, 1-5V, 0-5V
Construction: 316L stainless steel
Media: all gases, all liquids compatible with surfaces
Overload: 200%
Hydraulic connection: 1/4" NPT (m or f)
Electrical connection: M12 connector or cable
Waterproofing: IP65
Frequency response: 250Hz (4-20mA), 1kHz (voltage output)
Operating temperature: -40 to 80°C, media temperature: -40 to 125°C

Livrable sous 6 semaines

Introduction

The CS84 Intrinsically Safe Differential Pressure Transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 1 Intrinsically Safe locations. The CS84 features an all welded stainless steel construction for a minimum IP65 rating. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections. A wide range of configurable options make the CS84 a versatile pressure transducer that can be designed to operate in some the harshest conditions.

The small size makes it a perfect solution for differential measurement applications in confined spaces. Configuration options include differential pressure ranges up to 20 bar, various voltage and 4-20 mA output signals, and 1/4″ NPT male or female hydraulic connections.

Specifications

316L stainless steel Overload protection: 200%
Temperature range: -40 to 121°C
Total accuracy is 0.50%.
Measuring range: from +/- 70mbar to +/-20bar

Dimensions

Configuration

Applications

The CS84 Intrinsically Safe Differential Pressure Transducer is the ideal solution for differential pressure measurement in hazardous applications such as filter condition monitoring, sealed tank level measurement, and flow measurement across an orifice.