Ref: DRVZ

Power Take-Off Torque Transducer - 1800 Nm - IP67

Torque and angle measurement directly at the PTO
Measuring range: 0-1800 Nm or 0-2500 Nm
Accuracy: 0.2%
PTO splines : Type 1-3/8"-6, Type 2 1-3/8"-21 or Type 3 1-3/4"-20
Contactless signal transmission (optical)
Signal Output Torque : 0 ± 10V or 10kHz ±5kHz
Signal output Angle: 2 x TTL in quadrature
Robust IP67 design
Quick installation
Power supply: 10-28.8 VDC
Calibration certificate included

Standard lead time : 6 to 8 weeks

Presentation

DRVZ torque transducer enables the accurate torque measurement of any equipment or agricultural machine driven by a power take-off, for example at the output of a tractor transmission. The system supports Type 1-3/8"-6, Type 2 1-3/8"-21 or Type 3 1-3/4"-20 spline standards.

The measured signal transmission between the spinning shaft and the stator is contactless. The onboard electronics, which includes an amplifier stage and galvanic isolation, outputs the measurement signal as a voltage ±10V and a frequency of 10kHz ±5kHz. Supply voltage ranges from 10 to 28.8V DC.

Specifications

Specification	Value
Measuring range	±1800 Nm (Type 1 and 2), or ±2500 Nm (Type 3)
Interface	Type 1 1 3/8"-6, Type 2 1 3/8"-21 or Type 3 1 3/4"-20
Maximum speed	2000 rpm
Non-linearity	±0.2%
Hysteresis	±0.1%
Angular encoder	2 TTL quadrature, 360 pulses per revolution
Operating temperature	0-60°C
Temperature compensation	5-45°C
Power supply	10-28,8 VDC
IP rating	IP67
Standard EMC	tested to EN55011 and EN61000
Weight for 1 3/8" spline type	6 kg