Ref: SMT - ±5N à ±2kN - Surcharge 10x

S-type force transducer | 10x overload protection | ±5N to ±2kN

Measuring ranges: ±5N, ±10N, ±25N, ±50N, ±100N, ±250N, ±500N, ±1000N, ±2000N
Accuracy: 0.1% - Non-linearity: 0.05
Output signal: 2 mV/V
Calibration: tension/compression
Dimensions: 57.8x63x16.5mm or 57.8x63.5x29.2
Force transmission: 2 threads M6x1 to M12x1.75
Construction: Aluminum
Operating temperature : -25 to 80°C
Resonance frequency: 100 to 1500 Hz
Connection system: 2 m 4-wire cable

Usual lead time : 2 to 6 weeks

Presentation

SMT load cell measures compressive or tensile loads from ±5N to ±5000 N with very high accuracy in a very small footprint. Measurement accuracy is 0.05% of full scale, with a sensitivity output of 2 mV/V. Its design also includes mechanical stops for overload protection up to 10x for ranges up to 250N, and 5x for ranges > 500N.

Specifications

Measuring ranges [N]	±5 ±10 ±25 ±50 ±100 ±250 ±500 ±1000 ±2000
Accuracy	±0.05%
Output signal	2 mV/V
Power supply	1 to 15 VDC (5 V recommended)
Construction	Aluminum or steel IP66
Operating temperature range	-25 to 80°C
Temperature compensation	-15 to 50°C
Connectics	4-wire cable output, 2m long, without connector

Dimensions

The force is applied via 2 M6 or M12 threads on either side of the sensor.

Signal conditioning and acquisition

The SMT S-type load cell requires a voltage supply comprised between 2.5 and 10VDC.

Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Refer also to selection below:

GSV-2TSDI	MICRA-M	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	GSV-3USB
24-bit display with acquisition function	Display, 5 Digits	High accuracy analog amplifier, Rail Din	IP66 1-channel amplifier, Voltage or current output	In-line miniature amplifier, voltage / current output	Miniature PCB amplifier for OEM applications	Data acquisition module with USB interface