Ref: KD80s - ±100N à ±200kN - 150°C

S-Beam force sensor| ±100N to ±200kN | Option 150°C| IP65

Measuring ranges : ±100N, ±200N, ±500N, ±1kN, ±2kN, ±5kN, ±10kN, ±20kN, ±50kN, ±100kN, ±200kN
Accuracy 0.05% - Non-linearity : 0.02%
Signal output: 2 mV/V
Calibration : compression, tendsion ou tension/compression
Dimensions: 50 x 60 x 12,5 à 150 x 200 x 60 mm
force introduction : 2 threads M8x1,25 à M42x3
Material : Steel or aluminium IP65
Operating temperature : -10 à 85°C (-20 à +150°C optional)
Gain Temperature drift : 0.0015 %/°
Frequency resonance : 2kHz
Electrical : Cable 5 m 4 fils
Weight : >150g

Introduction

The KD80s S-beam strain gauge load cell is used for tension/compression force measurement, as well as for weighing. 11 measuring ranges from 100N to 200kN are available, the accuracy is excellent (0.05% of the measuring range), the sensitivity of the measurement to temperature is limited. The output signal at nominal load is 2 mV/V

The stainless steel housing is sealed to IP65, the operating temperature is -10 to 85°C. The sensor is supplied with a 4-wire Unitronic FD CP Plus 4x0.14 cable, 5m long, without connector.

A high temperature version ( KD80s HT) is also available for use up to 150°C. In this version, the 5m long 6-wire cable is approved for high temperature operation: ALMI HAFL-C MOD. SO 2x2x0.25.

Installation

The mounting of the KD80s sensor, and therefore the introduction of forces, is done by means of two metric threads in the centre of the upper and lower surfaces of the sensor, with dimensions increasing with the load (M8 to M42).

Signal conditionning

The KD80s load cell is powered with a DC voltage of 2.5 to 10VDC. . Displays, Amplifiers and Data acquisition modules are offered wherever needed.

Applications

Cable resistance measurement
Test benches
Weighing scales
Lifting tools
Static laboratory tests
Material characterisation
Integration into machine tools

Type: S-beam
Measuring Range: ±100N , ±200N , ±500N , ±1kN , ±2kN , ±5kN , ±10kN , ±20kN , ±50kN , ±100kN , ±200kN
: 5 Nm
Precision (max error): ≤ 0.1 %
Nonlinearity (% FS): ± 0.02 %
Hysteresis: 0.02 % FS
Nonrepeatability: 0 % FS
Temperature Compensated Range: -10 to 70 °C
Température de fonctionnement: -10 to 85 °C
Zero Balance: 0.02 %PE/°C
Sensibilité du gain: 0.02 %/°C
Analog output signal: non-amplifié
Output Signal: 2 mV/V
Résistance du pont: 350 Ω
Tension d'alimentation: 10 Vcc
Measurement direction: Traction & Compress.
Déflection: 0.2 mm
Surcharge: 150 %PE
Protection Class: IP65
Measuring Range (Force): ⩽ 1 kN, 1 - 100 kN, 100 - 250 kN
Application: High Accuracy, OEM, High temperature

Dimensions

Dimension	100-500N-1kN	2kN	5kN-10kN	20kN-50kN	100 kN	200kN
A [mm]	50	50	50	80	120	150
B [mm]	10	10	12	20	30	40
C [mm]	18	18	20	32	45	60
D [mm]	30	30	30	50	75	100
E [mm]	60	60	60	100	150	200
F [mm]	18	18	20	32	45	60
G [mm]	10	10	12	20	30	40
H [mm]	25	25	25	40	60	75
I [mm]	12,5	20	20	30	45	60
J [mm]	25	25	25	40	60	75
K [mm]	6,25	10		15	22,5	30
1	M8x1.25 x 10V118°	M12x1.75 x 10V118 ˚	M12x1.75 x 12w118°	M20x1.5 x 20w118°	M30x2 x 30V118°	M42x3 x 40V118°

Electrical

Standard

cable Unitronic FD CP Plus 4x0,14.

Pin	Signal	wire color
+Us	Supply +	Brown
-Us	Supply -	White
+Ud	Signal +	Green
-Ud	Signal -	Yellow

Haute température

6-wire high temperature resistant cable E 2419 STK 6 6x0,25 PTFE.

+Us
+Ud
-Ud
+Uf
-Uf

Configuration options

Tensile and/or compression calibration
Operating temperature range
Cable length
Specific connector
Extended temperature compensation
ISO 17025 calibration
rod-eye bearing

Amplifier
Display
rod-eye bearing

S-Beam force sensor| ±100N to ±200kN | Option 150°C| IP65

Introduction

Installation

Signal conditionning

Applications

Dimensions

Electrical

Standard

Haute température

Configuration options

Related products

KD40s - IP65 - ±2N à ±5kN

KM90 - KM90e

SSM / SSM2 - ±200N à ±50kN

GSV 2 MSD DI