Ref: V-SERIES - précision
Melt pressure sensor - injection molding - high accuracy
- Fully welded stainless steel construction
- Diaphragm material: 17-4 PH stainless steel + GPX impregnation
- Interchangeability with existing sensors
- High resistance diaphragm
- Accuracy: ±0.25% (Premium) or ±0.5% (Standard) of full scale
- Measuring range: 0-50 to 0-2000 bar
- Signal output: 4-20 mA, 0-10 VDC or 3.33 mV/V
- Overload protection: 200M
- Hydraulic interface: 1/2" thread - 20-UNF-2A
- Standard electrical connection: PTIH-10-6P connector
- Operating temperature: up to 400°C at the diaphragm, and 80°C for the electronics
?
Introduction
The V-Series pressure sensors allow direct measurement of the pressure in the plastic injection molding cavity. The sensor features an accuracy of ±0.25% / ±0.50% of full scale, an excellent lifetime, and a temperature resistance up to 400°C in the process.
Specifications
| Specification | |
|---|---|
| Range | 0 à 50/75/100/150/200/350/500/700/750/1000/1400/2000 ou custom |
| Precision | 0,25% |
| Operating temperature | up to 400°C at the membrane, and 80°C at the electronics |
| Output signal | 3,3 mV/V, 4-20 mA ou 0-10V |
Mounting
The sensitive part of the sensor is fixed in the tooling, by screwing (thread 1/2" - 20-UNF-2A), the membrane being flush with the cavity. The probe is connected to the sensor body (containing the electronics) by a rigid or semi-rigid tube, depending on the application needs.
Options
Standard version
Standard version
- 0.25 %
- Sortie analogique
- analog (mV/V), analog (Voltage), analog (Current)
- Signal otuput
- analog (mV/V), 0-10VDC, 4-20 mA
- Application
- High temperature, Melt
- Tension d'alimentation
- 12-29 VDC
- 316 Stainless Steel
Datasheet_V_Series_PMI_EN.pdf
+33 1 46 91 93 32
Contact form
S'inscrire à la newsletter