Closing force measurement of lift doors according to EN81, EN14120
- Standards : EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- Certified by TÜV Nord
- Measuring range : 0/750N
- Stiffness : 25N / mm
- Accuracy : +/- 3N or 3%
- Interstice : 145-510
- Gap : 145-510 mm
- Measurement recorder and analysis software included
- Interface : Cable or Bluetooth
- Software in French
- Automatic generation of test reports
- Dimensions : 290x140x60mm
- Weight : 1.7 kg
Introduction
Drive Test's FM 300 is an electronic closing force measurement system for automatic lift doors. Typical applications include final inspection of new installations, as well as periodic compliance testing of existing equipment.
The construction is robust and the accurate measurement is highly repeatable. Maintenance consists of annual or bi-annual recalibration according to the user's standards.
The FM 300 complies with EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120 and has been tested and certified by the German TÜV Nord.
Specifications
| Measuring range | 0–750N |
|---|---|
| Accuracy | +/– 3 N ou 3 % of the measured value |
| Stiffness | 25 N/mm |
| Interstice | 145-510 mm |
| Surface | 58 mm |
| Measurement principle | Strain gauges |
| Dimensions | 290 x 140 x 60 mm |
| Weight | 1,7 kg |
Use
Quick and easy operation requires no training. Measurements are triggered and recorded using the supplied control panel. Configuration, visualisation, evaluation of measurements and automated test report generation are carried out using the Pinch Pilot PC software supplied with the FM-300.
Cable version with console
Bluetooth version
Software
The PinchPilot operating software for Windows PCs offers a dedicated mode for measuring at multiple door sites, automating the test sequences. The measurement results can then be displayed and printed out in a table or stored in a database. This significantly reduces the documentation effort.
Microsoft® DLL or National Instruments® LabVIEW libraries are also included for fully automated remote control.
Included with the system
Sensor
- Sensor with 2.5m cable
- Portable control panel with LCD display, serial port (standard version only)
- 9V battery (standard version only)
- Carrying case
- USB cable
- USB key with PinchPilot PC software
- User manual
- Calibration certificate
Pinch Pilot Software
- Operating System Windows Vista, Windows 7, 8 and 10
- RAM ≥ 32 MB
- Free Disk Space ≥ 50 MB
- RS232 or USB interface
Options and accessories
- Sensor with 5m cable instead of 2.5m
- Adapter for external 24 VDC power supply
- Power supply 230 VAC
- Extension kit for 51 cm gap
- Application
- lift
- Measuring Range
- 200
- Tension d'alimentation
- 10 Vcc
Datasheet_FM300_pmi_EN.pdf
- Dimensions: 240x85x50mm
- Weight: 1.3 kg
- Sensor with 5m cable instead of 2.5m
- Adapter for external 24 VDC power supply
- Power supply 230 VAC
- Extension kit for 51 cm gap
- Sensor with 5m cable instead of 2.5m
- Adapter for external 24 VDC power supply
- Power supply 230 VAC
- Extension kit for 51 cm gap
Related products
FM-205 - Standard / Bluetooth
+33 1 46 91 93 32
Contact form
S'inscrire à la newsletter