Ref: DRFS - torquemeter tools

Industrial rotary torque meter with hexagonal section - 20 Nm - 0.25% accuracy

Measuring range: 1 to 20 Nm
Maximum speed: 10000 rpm
Hexagonal section
Output signal: ±5 V
Non-linearity: 0.15
Non-contact measurement signal transmission
Temperature compensated calibration from 5 to 45°C
Connector output (Connector supplied)
Overload protection: 30 to 100% depending on the measuring range
Angular position output as an option (DRFS-I-w version)

Introduction

The DRFS is an accurate and compact rotary torque transducer developed for production use. Available in 7 measuring ranges from 1 to 20Nm, the non-linearity is less than 0.15% and the temperature sensitivity is very low.

Mounting and installation

The DRFS sensor is supplied with 10VDC. The output signal is a voltage +/- 5VDC linear with the measured torque. The hexagonal cross-section according to DIN 3126 allows instant mounting on the tool or equipment to be checked. Dimensions