Bolt force sensor - M5 to M16 - 0-5kN to 0-200 kN
- type: Bolt force sensor;
- nominal force: 5kN, 10kN, 20kN, 30kN, 40kN, 50kN, 60kN, 100kN, 200kN
- Inner diameter : M5, M6, M8, M10, M12, M16
- accuracy class: 1 %;
- dimensions: Ø 16 x 7 mm à Ø 40 x 12 mm
- connection: 3m STC-32T-4;
- Operating temperature : -10 à +85 °C
- calibration certificate 5 measurement points; 3 test series with 3 mounting positions;
- accessories incl.: 2x washers for load distribution,
- recommended accessories: adapter cable sub-D15/f;
Presentation
The bolt force transducer KR20 has been designed for measuring the clamping force of a screwed assembly with bolts of diameter M5 to M16. The accuracy is in range of 1% of full scale.
Available in 11 measuring ranges from 0-5kN to 0-200 kN, KR20 features a robust design (stainless steel, IP 65, overload protection of 150%) and an operating temperature range between -10 and 85 ° C .
A complete 5-point factory calibration certificate is supplied with each sensor (9 repetitions)
Specifications
| Bore | Measuring ranges | Output signal | Accuracy | Height |
|---|---|---|---|---|
| M5 | 5 kN | 0.4 to 0.7 mV/V | 1% | 7,2 mm |
| M6 | 20 kN, 40 kN | 0.4 to 0.7 mV/V | 1% | 7 mm |
| M8 | 20 kN, 40 kN | 0.4 to 0.7 mV/V | 1% | 7,1 mm |
| M10 | 30 kN, 60 kN | 0.4 to 0.7 mV/V | 1% | 8,7 mm |
| M12 | 50 kN, 100 kN | 0.4 to 0.7 mV/V | 1% | 9,1 mm |
| M16 | 100 kN, 200 kN | 0.4 to 0.7 mV/V | 1% | 12 mm |
Installation
Voltage supply: 5 or 10VDC. Non-amplified output signal. Connection: 1 3m cable with a SUB-D15 connecteur, which shall not be removed, as it contains the calibration resistors.
2 hardened washers are included for load distribution.
The following amplifiers are recommended to be used with the KR20:
Applications
- tightening force measurement
- Clamping force measurement
- prestraint force measurement
- tightening torque measurement
Options and accessories
- extended compensation temperature area
- cable length
- calibration
- TEDS module
- Amplifier, display
- Acquisition module
- Type
- Load washer
- Measuring Range
- 5kN , 10kN , 20kN , 30kN , 40kN , 50kN , 60kN , 100kN , 200kN
- Precision (max error)
- 1 %
- Nonlinearity (% FS)
- ± 0.5 %
- Hysteresis
- 0.50 % FS
- Nonrepeatability
- 0.05 % FS
- Temperature Compensated Range
- -10 to 70 °C
- Température de fonctionnement
- -10 to 85 °C
- Zero Balance
- 0.05 %PE/°C
- Sensibilité du gain
- 0.05 %/°C
- Analog output signal
- non-amplifié
- Output Signal
- 0.4 , 0.7 mV/V
- Résistance du pont
- 350 Ω
- Tension d'alimentation
- 10 Vcc
- Measurement direction
- Compression
- Déflection
- - mm
- Surcharge
- 150 %PE
- Protection Class
- IP65
- Measuring Range (Force)
- 100 - 250 kN
- Application
- OEM, low cost
Datasheet-V2_KR20_pmi_FR.pdf
KR20-M5_5kN_000.zip
Dimensions
| Dimension | 5kN M5 | 10/20kN M6 | 20kN M8 | 30/60kN M10 | 50/100 kN M12 | 100/200kN M16 |
|---|---|---|---|---|---|---|
| A | 7,35 | 10,5 | 13,75 | 17 | 22,5 | 30 |
| B | 6 | 6 | 8 | 10 | 12 | 16 |
| C | 14,5 | 16 | 20 | 25 | 30 | 40 |
| D | 17,9 | 19,7 | 23,7 | 28,75 | 33,5 | 43,6 |
| E | 7,2 | 7 | 7,1 | 8,7 | 9,1 | 12 |
| F | 5,9 | 5,5 | 5,5 | 7,5 | 7,5 | 10 |
| G | 14,5 | 16 | 20 | 25 | 30 | 40 |
| H | 6 | 6 | 8 | 10 | 12 | 16 |
| I | 12,2 | 13 | 13 | 17 | 17 | 20 |
| J | 7,2 | 7 | 7 | 9 | 9 | 12 |
| R | 1,5 | 1,25 | 1,75 | 3,5 | 5 | 6 |
Electrical connections
3m Cable
| Pin | Description | Wire color |
|---|---|---|
| +Us | Supply + | red |
| -Us | Supply - | black |
| +Ud | Output + | green |
| -Ud | Output - | white |
Options and accessories
- extended compensation temperature area
- cable length
- calibration
- TEDS module
- Amplifier, display
- Acquisition module
Related products
LWCF - M6 à M53 - 15 à 1500 kN
GSV 2 MSD DI
GSV-3USBx2
+33 1 46 91 93 32
Contact form
S'inscrire à la newsletter