Ref: LCF-100

Inertial inclinometer 1 axis - 1 to 90° - shock limit 1000 g - Output ± 5VDC

Single-axis inertial inclinometer
Measurement range: ± 1 to ± 90°.
Accuracy: 0.02 to 0.05
Shock limit: 1000g - Vibration: 0.002 Vrms
Bandwidth: 0-30 Hz
Output signal: ± 5 Vdc
Operating temperature: -40 to +80°C
Power supply: 12Vdc to 18 Vdc

Presentation

LCF-100 is a robust, single-axis inclinometer designed to meet the most demanding accuracy requirements. Extremely fine angle measurement is based on gravity measurement using a servo-controlled inertial table and an optical sensor. Accuracy is between 0.02% and 0.05% of full scale, depending on the measurement range, with a bandwidth of up to 30Hz and exceptional resolution of 1µrad.

The LCF-100 model measures on 1 axis for ranges from ±1.0 to ±90.0°. The output signal is ±5VDC. Temperature sensitivity is extremely low (< 0.0003V/° over the ±90.0° range).

The design of the LCF-100, whose sensitive elements are protected from shock and vibration by a fluid damping system, enables accurate, reliable measurement in harsh environments:

operating temperature: -40 to +80°C
shock limit: 1000g
Vibratory: 0.002 Vrms
IP65 waterproof steel case

Installation

The LCF-100 inclinometer is mounted on the application using 3 M4 screws. Electrical connection is made either via a connector or a 13-pin terminal block mounted on the inclinometer. Optional connectors and cables are available.