General Purpose Gage/Absolute Pressure Transducer
- Measuring range : 35 mbarD à 700 barD
- Accuracy : 0.25 %
- Signal output : 1 à 2 mV /Volt,4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc
- Pression de ligne : 100 à 150 bar (350 bar en option)
- Overload protection : 100 %
- All-welded, stainless steel construction
- Connexion hydraulique :1/8 NPT F
- Connexion électrique : Bendix 6pts
- Housing : inox 316
- Intrinsically safe available (2N option only)15
Introduction
Model A-5 pressure transducers are all-welded stainless steel sensors built for rugged industrial applications that require high accuracy and measurement stability. Pressure ranges span from 0.5 psi to 60000 psi. They utilize complete four-arm 350 ohm strain gage bridges. The Model A-5 is available with a variety of options for extended temperature operation, electrical terminations and high-level outputs including 5 Vdc or 10 Vdc and 4 mA to 20 mA. Most high-level output models have internal shunt calibration circuits as a standard feature to allow easy set-up of the sensor to the data system. An optional internal signature calibration chip provides calibration information for automatic set up with the Model SC four-or-twelve channel digital indicator.
The gage Model A-5 is a strain gage based transducer. This design references the primary pressure sensing diaphragm to the atmosphere, and provides a stable zero regardless of the transducer environment.
The absolute Model A-5 has an all-welded vacuum reference chamber assuring long-term stability
Setup
Configuration options include:
- Extended operating temperature range
- Electrical connection
- Amplified output (5 Vdc or 10 Vdc and 4 mA to 20 mA)
- Most amplified models have internal shunt calibration circuits as a standard feature to facilitate sensor configuration on the acquisition system.
The Model A-5 is offered in 2 variations:
- "Gauge" version: the pressure measurement is made with the atmospheric pressure as reference. It allows to have an offset independent of the environment
- Absolute" version: the measurement is made with a fully welded vacuum cavity as reference, which increases the long term stability.
Applications
- processes
- oil and gas
- packaging
- pumps and compressors
- Type
- Absolute / Relative
- Measuring Range
- < 1 bar, < 100 bar, < 1000 bar, > 1000 bar
- Precision (max error)
- 0.5 %
- Nonlinearity (% FS)
- ± 0.25 %
- Sortie analogique
- analog (mV/V), analog (Voltage), analog (Current)
- Application
- Sbmersible
- Tension d'alimentation
- 10 Vcc
- Protection Class
- IP68
Consult us
- References: AP141, AP142
- Extension of the operating temperature range
- Electrical connection
- Amplified output (5 Vdc or 10 Vdc and 4 mA to 20 mA)
- Display
- Hydraulic port adapter
- Conditioner