Low capacity S-Beam force sensor - ±0.1N to ±10N

Presentation

The S-beam force transducer KD18S measures low compressive or tensile forces ranging from a few mN to 10N in an ultra-miniature size (18 x 18 x 10mm only). Available in 3 measuring ranges between 100 mN (10 grams) and 10N (1 kg), the measurement accuracy is 0.1% of full scale for a sensitivity of 0.5 mV / V. The overload protection is 2 times the measuring range.

The force is applied via 2 M2.5 threads on either side of the sensor, and moves the two flanges parallel. The KD18s sensor is supplied with a 3m cable, and the operating temperature range is -10 to + 85 ° C. The output of the sensor cable, 3m long, can be horizontal or vertical. Ball joints are available as an option.

Packaging and acquisition

The S KD18S sensor is supplied with 1 to 10 Vdc. Complete and configured measurement chain in option by adding a display, amplifier. or acquisition module. See our selection:

• Display: used to view the measurement directly in units, to manage thresholds, max values -min and an amplified output.
• Amplifiers: used to convert the measurement signal into voltage or current (± 5, ± 10 Vdc, 0-10 Vdc or 4-20 mA).
• Acquisition systems: Transmission of measurement signals to a PC, a programmable logic controller, a recorder or a SCADA type supervision application.

Applications

• Quality control in production
• Material resistance test
• Simple breaking force measurement
• Assembly on control machine
• Measurement of machining force
• Deformation measurement
• Weighing

Dimensions

Connectique

Cable STC-32T-4 3m 4 fils open

Convention

• Compression : signal positif

• Connector on cable for acquisition
• Extended temperature compensation
• Packaging and acquisition electronics
• Connector output on request
• TEDS module

Amplifier / Display

• 1 channel amplifier: GSV-6K (online), GSV -1H (DIN Rail), GSV-1M (IP67) or GSV-6L (miniature)
• 1-channel display: MICRA-M (simple) or GSV-2MSDI (with stand-alone recorder function)
• Table-top conditioner / display GSV-2TSDI
• 4-way amplifier GSV-1A4

Acquisition module

• 1 channel: GSV-2AS (RS-232/485 or CANopen) or GSV-3USB (1 or 2 USB channels)
• 4 channels GSV-4USB (USB)
• 6 channels GSV-6BT (Bluetooth) or GSV-6LTE (LTE Datalogger)
• 8 channels GSV-8DS (LAN / WiFi / USB / EtherCAT / CANRS-232)