Ref: LCF-300

1 axis inertial inclinometer - ±1 to ±90° - 1500g shock limit - ±5VDC output

Single-axis inertial inclinometer
Measurement range: ± 1 to ± 90°.
Non-linearity : 0.02 to 0.05%
Shock limit: 1500g - Vibration: 20 grms
Bandwidth: 0-30 Hz
Output signal: ± 5 Vdc
Operating temperature: -40 to +80°C
Power supply: 12Vdc to 18Vdc
IP65 enclosure

Présentation

LCF-300 is a precision single-axis inclinometer designed for the most demanding industrial applications. Extremely fine angle measurement is based on gravity measurement using a servo-controlled inertial table and an optical sensor. Accuracy is between 0.02% and 0.05% of full scale, depending on the measurement range, with a bandwidth of up to 30Hz and exceptional resolution of 1µrad.

The LCF-300 model measures on 1 axis for ranges from ±1.0 to ±90.0°. The output signal is ±5VDC. Temperature sensitivity is extremely low (< 0.0003V/° over the ±90.0° range).

The design of the LCF-300, whose sensitive elements are protected from shock and vibration by a fluid damping system, enables accurate, reliable measurement in harsh environments:

operating temperature: -40 to +80°C
shock limit: 1500g
Vibration: 20 grms
IP65 waterproof steel case

Installation

The LCF-300 inclinometer is mounted on the application using 3 M4 screws. Electrical connection is made either via a connector or a 4-pin terminal block mounted on the inclinometer. Optional connectors and cables are available.