Ref: LIPS P103

Push rod displacement sensor - 0-5 to 0-50 mm - IP67

  • Type: push-rod displacement sensor
  • Measuring range: 0-5 to 0-50 mm
  • Construction: steel
  • Linearity: 0.25% PE
  • Operating temperature: -40 °C to 125 °C
  • Frequency response: 10 kHz
  • Body diameter: 36mm
  • SIgnal output : voltage or current

Download the product sheet

?

Overview

The P103 series has measuring ranges from 0-5 mm to 0-50 mm with many options such as connector or cable output, or threaded or tipped shaft. Linearity is < 0.25% of span, and resolution is infinite. The bandwidth is 10 kHz.

The measurement is made without contact between the fixed part and the moving part, allowing a very high number of cycles, MTBF > 350 000 hours, and excellent repeatability. This probe is used for displacement or position measurement in harsh environmental conditions.

Configurations

signal Voltage supply Charge
0.5-4.5 Vcc Ratiometric + 5Vcc ± 0.5 Vcc, 10 mA 5kΩ min
0.5-4.5 Vcc +24Vcc ou + 9-28Vcc -10 mA 5kΩ min
± 5 Vcc ± 15 Vcc ou ± 9-28 Vcc - 10 mA 5kΩ min
0.5-9.5 Vcc +24Vcc ou + 9-28Vcc -10 mA 5kΩ min
± 10 Vcc ± 15 Vcc ou ± 13.5-28 Vcc 5kΩ min
4-20 mA (2 wires) +24Vcc ou + 18-28Vcc -10 mA 300Ω min
4-20 mA (3 wires) +24Vcc ou + 18-28Vcc -10 mA 950Ω min

Mounting

The fixed part (body) of the sensor is installed by means of a clamp or a mounting flange. The movable part, corresponding to the displacement measurement, can be free or spring-loaded and permanently pressed against the part to be measured. It can also be bound by a threaded hole at the end of the rod.

Applications

The LIPS P103 sensor is recommended for :

  • Displacement measurement
  • Vibration measurement
  • Displacement and control monitoring
  • Position monitoring
  • Actuators on construction machinery
  • Laboratory measurements
Technologie
Linear inductive
Etendue de mesure linéaire
50 mm
Measuring range
0 à ±50 mm
Nonlinearity (% FS)
± 0.25 %
Signal otuput
0-5 VDC, 0-10VDC, ± 5 VDC, ± 10 VDC, 4-20 mA
Analog output signal
0-5 VDC
Protection Class
IP67
Tension d'alimentation
24 Vcc
Housing
Steel
Application
ATEX, Sbmersible, Taster
Etendue de mesure Montage Standard Montage par bride
2 mm à 10 mm 65 mm 81.3 mm
11 mm à 20 mm 75 mm 91.3 mm
21 mm à 30 mm 85 mm 101.3 mm
31 mm à 50 mm 105 mm 121.3 mm
Option
Connector - Hirschmann GD series Axial, IP65
Connector - Axial IP67, M12 - 4 pin. Without trim adjustment
Connector - Axial IP67, M12 - 4 pin. With trim adjustment
Cable with M12 gland Axial, Gland, IP67
Cable with short gland Axial, Gland, IP67
  • Cable extension
  • Connector

Related products

Conditionneur Afficheur universel

TRA 220

Conditioner Universal display 1 analog channel (Vcc, Tc, Ma, mV ...) - output RS-485
Hardened inductive probe

LIPS P112 - 0-50mm - IP67 - palpeur

Hardened inductive probe - 0-5 to 0-50 mm - IP67 - Diameter : 19 mm - ATEX option
Palpeur inductif

LIPS P118 - palpeur - ⌀ 19

Inductive probe - 0-2 to 0-50 mm - IP67 - ⌀ 19 - ATEX option
LTP - Linear displacement sensor - 0-50 to 0-1000 mm - double articulated

LTP

Linear displacement sensor - 0-50 to 0-1000 mm - double articulated
Phone +33 1 46 91 93 32