Ref: KD120 - ±100N to ±2kN

Double bending beam force sensor - 100 to 2000 N - 150°C

  • type: double bending beam force sensor;
  • nominal force: ±100N, ±200N, ±500N, ±1000N, ±2000N
  • accuracy class: 0,1 %;
  • Operating force limit: 150%
  • Lateral force limit : 200%
  • dimensions: 120 mm x Ø 42 mm
  • force transmission: 2 x feedtrough diameter 8,2 mm;
  • connection: 5 m Unitronic FD CP Plus/4x0,14 / E 2419 STK 6 6x0,25 PTFE
  • material: Stainless Steel IP67;
  • Operating temperature : -10 to 85°C (optional -20 to +150°C)

Download the product sheet

?

Presentation

The KD120 force sensor is particularly suitable for integration in assembly and testing devices due to the rugged and sealed design (IP67 stainless steel) and the tolerance against displacements of the force introduction and against transverse forces. The mounting is made via through-holes Ø8,2mm.

Due to the design of the sensor as a double beam (parallelogram guide), the force introduction point shifts parallel by approx. 0.2 mm at 100% of the nominal force, while the sensor tolerates displacements of force transmission and lateral forces. (lateral force limit : 200% of nominal force)

Available measuring ranges are : ±100N, ±200N, ±500N, ±1000N, ±2000N. The accuracy of 0.1% is already reached at a nominal output of 1mV/V.

Specifications

Measuring Range ±100N, ±200N, ±500N, ±1000N, ±2000N
Accuracy 0,1 %
Non-linearity 0,1 %
Dimensions 120 mm x Ø 42 mm
Output signal 1mV/V
Max operating force 150%
Max lateral force 200%
Operating Temperature -10 à 85°C

Dimensions

Signal conditioning

Various solutions are offered for the output amplification including:

  • Indicators
  • Miniature signal amplifiers as GSV-1M

Applications

  • weighting
  • Force measurement
  • Test rigs
  • Industrial scales
Type
beam sensor
Measuring Range
±100N , ±200N , ±500N , ±1000N , ±2000N
Number of Axis
1 Axis
Precision (max error)
≤ 0.1 %
Nonlinearity (% FS)
± 0.03 %
Hysteresis
0.3 % FS
Nonrepeatability
0.01 % FS
Temperature Compensated Range
-10 to 70 °C
Température de fonctionnement
-10 to 85 °C
Zero Balance
0.008 %PE/°C
Analog output signal
non-amplifié
Output Signal
0.5 mV/V
Résistance du pont
350 Ω
Tension d'alimentation
10 Vcc
Cable
5 m Unitronic FD CP Plus/4x0,14 OR E 2419 STK 6 6x0,25 PTFE;
Measurement direction
Flexion
Déflection
0.1 mm
Surcharge
400 %PE
Stainless Steel
Protection Class
IP65
Poids
380
Measuring Range (Force)
⩽ 1 kN, 1 - 100 kN
Application
High Accuracy, low cost

  • operating temperature
  • material
  • measuring range
  • calibration

Instrumentation

Related products

poutre de flexion

SSB

Capteur de force Poutre - 200N à 22kN - Compression
Conditionneur capteur de force IP67

GSV-1M - 1 voie - Jauge - IP67

1- channel straingauge amplifier in potting box IP67
KD60 - ±5Nà ±1kN - Double bending beam force sensor - 5 to 1000 N

KD60 - ±5Nà ±1kN

Double bending beam force sensor - 5 to 1000 N
Capteur de force poutre de flexion

KD140 - ±50Nà ±1kN

Double bending beam force sensor - 50 to 1000 N - IP67
Phone +33 1 46 91 93 32