Ref: KD68 - ±5Nà ±1kN

Double bending beam force sensor - 5 to 1000 N - flat design

  • type: double bending beam force sensor;
  • nominal force: ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±500N, ±1000N
  • accuracy class: 0,1 %;
  • Output signal : 1mV/V
  • Operating force limit: 400%
  • Lateral force limit : 200%
  • dimensions: 68 mm x 16mm x 14mm
  • force transmission: female thread M6x1;
  • Bridge voltage supply : 1 to 10 VDC
  • connection: 1 m STC-31V-4;
  • material: aluminium or stainless steel (VA) IP65;
  • Operating temperature : -10 to 85°C

Download the product sheet

?

Presentation

The force sensor KD68 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø6. There is a thread M6 for force transmission. The surfaces for mounting the sensor and for mounting the force introduction are offset by 1.5 mm so that the sensor can be mounted without additional spacers. Due to its very flat design, the sensor is also suitable for mounting between plates to build up a force measuring plate, for example to determine the center of pressure (COP).

Force transmission is displaced parallel under loading. The force sensor tolerates displacements of force transmission and lateral forces due to its design as a double beam (lateral force limit : 200% of nominal force). The force sensor KD68 is designed as a multi-range sensor. Available measuring ranges are : ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±500N, ±1000N. The accuracy of 0.1% is already reached at a nominal output of 1mV/V. The maximal operating force is 400% of the nominal effort.

Various solutions are offered for the output amplification including:

  • Indicators
  • Miniature signal amplifiers as GSV-1M

Specifications

Measuring Range ±5N, ±10N, ±20N, ±50N, ±100N, ±200N, ±300N, ±500N, ±1000N
Accuracy 0,1 %
Non-linearity 0,1 %
Dimensions 45 mm x 8 mm x 8 mm
Output signal 0,5mV/V
Max operating force 400%
Max lateral force 500%

Dimensions

Applications

  • weighting
  • Force measurement
  • Test rigs
  • Industrial scales
Type
beam sensor
Measuring Range
±5N , ±10N , ±20N , ±50N , ±100N , ±200N , ±500N , ±1000N
Precision (max error)
≤ 0.1 %
Nonlinearity (% FS)
± 0.03 %
Hysteresis
0.3 % FS
Nonrepeatability
0.01 % FS
Temperature Compensated Range
-10 to 70 °C
Température de fonctionnement
-10 to 85 °C
Zero Balance
0.008 %PE/°C
Analog output signal
non-amplifié
Output Signal
1 mV/V
Résistance du pont
350 Ω
Tension d'alimentation
10 Vcc
Cable
cable 1 m STC-31V-4
Measurement direction
Flexion
Déflection
0.1 mm
Surcharge
400 %PE
Aluminium ou Acier inoxydable
Protection Class
IP65
Measuring Range (Force)
⩽ 1 kN, 1 - 100 kN
Application
High Accuracy, low cost

  • operating temperature
  • material
  • measuring range
  • calibration

Instrumentation

Related products

Poutre de flexion

MB

Capteur de force Poutre 1.1 kN
poutre de flexion

SSB

Capteur de force Poutre - 200N à 22kN - Compression
Conditionnement de mesure

GSV-6K

Conditionneur - 1 entrée pont de jauges - Sortie CANopen
KD60 - ±5Nà ±1kN - Double bending beam force sensor - 5 to 1000 N

KD60 - ±5Nà ±1kN

Double bending beam force sensor - 5 to 1000 N
Phone +33 1 46 91 93 32