3-axis force transducer - 2N à 50 N - 40 x 40 x 20 mm - IP65

Introduction

The 3-component force transducer K3D40 measures simultaneously the forces Fx, Fy, Fz on three perpendicular axes. The measurement ranges on each axis are between +/-2 N and +/-20 N, the overall accuracy is 0.5% (0.1% optional), and the sensitivity to transverse forces (crosstalk) is 1%.

The 3-component force transducer K3D40 is easily installed on machine tools, arms, or test benches. The introduction of the forces and the fixation to the stator/bench are carried out by 4 tappings M3x0,5, by respecting the tightening torques (see here). A distance of 1 mm must be kept between the adaptation parts and the sensor body.

The sensor is supplied with 5 VDC. The operating temperature range is -20 to 70°C. The output signal is unamplified (0.5 mV/V). The 3 output signals are decoupled by the design of the sensor, and correspond directly to the actual forces. No additional decoupling is required. The sensor is delivered with a 3m cable.

Specifications

The K3D40 sensor is available in 4 measuring ranges:

Each sensor is delivered with a factory calibration certificate. Calibration to specific measuring ranges is possible (optional), as well as ISO-17025 calibration.

Dimensions

Signal conditioning and acquisition

The acquisition of the raw measurement signals can be completed with

• either a data acquisition module to connect to a PC (Windows 10) or a PLC
• or via a multichannel amplifier for strain gage bridges with analogue output (voltage or current)

GSV-4USB	GSV-1A4	SGA3A	GSV-8DS	GSV-4BT M12	GSV-6BT
Data acquisition module, 4 analog input channels, 16 bits, with acquisition software, USB Interface	4 channel strain gage amplifier with +/- 10V and 4-20mA output	3 - channel strain gage Precision amplifier with +/- 10V output	Acquisition Module, 8 analogue inputs, 24 bit, 48 kHz with acquisition software, USB interface (EtherCAT, CAN optional)	4 channel Bluetooth analogue acquisition module, Datalogger optional	6 channel Bluetooth analogue acquisition module with Datalogger. Miniature.

Visualisation and acquisition software is included with the acquisition modules (GSV-multi). Dll and VI files are also provided for application development in Labview or C / Visual Studio / C++ / .net

Options and accessories

• High accuracy calibration
• ISO-17025 calibration certificate

Applications

The 3-component force sensor K3D40 is ideal for robotics, production, material or medical applications such as

• Teach-in detection of presence or error
• Force controlled operation
• Friction measurement
• Ergonomic measurements

• Connector on cable for acquisition
• Extended temperature compensation
• Electronic conditioning and acquisition
• Connector output on request
• TEDS

• Conditioners
• Cables and connectors