Ref: TW10.8

Wheel Torque Transducer – 4kNm

  • 4kNm moment capacity
  • for passenger cars, SUV and light duty-vehicles
  • Adapts to 13″ and larger wheels
  • Non-linearity: 0,1% of FSO
  • Environmentally protected
  • Temperature compensated
  • Rugged stainless steel construction
  • Enhanced resolution model available (TW12.8HRMS175)
  • Configured to minimize magnetic sensitivity

Download the product sheet

?

Presentation

The wheel torque tranducer TW10.8 provides a real time measurement of the actual torque at the wheel (My), allowing to measure both transmission and brake torque. Both the torque and combined steer/camber moment load ratings of the TW10.8 transducer are 4000 Nm, which fits most of the passenger cars, SUV and light duty vehicles. Highly accurate (non-linearity ≤ 0.1% of FSO, hysteresis < 0,05% of FSO), it has a very low sensitivity to the temperature, thanks to the temperature compensated calibration between 24 and 121°C. Useful on long drive tests, especially when repeated hard brakes increases the temperature, without generating any deviation in the measured data.

Installation

TW10.8 is designed to attach itself to adapters that simulate production wheel rims. The adapter system is fabricated by generating a profile of the original wheel rim and designing a hub adapter and rim adapter, which fasten to the interior and exterior bolt circle respectively and duplicate the critical dimensions of the original rim. The versatility of this system allows the torque transducer to be used with various wheel rim designs, as long as the rim size is >= 13", and the maximum wheel torque does not exceed 4,0 kNm. High grade stainless steel material and weatherproof sealing combine to provide excellent resistance to corrosion and environmental conditions (rain, snow, ice, mud). The measure is stable over a wide operating temperature range (-40°C à +177°C). In addition, all wires are precisely located to reduce sensitivity to magnetic effects.

Signal acquisition

TW10.8 strain gage bridge powering and the output signal transmission to the data acquisition system can be achieved by wire (slip ring) or wireless (telemetry). The transducer outputs a non-amplified signal (1,5mV/V), an amplifier can be added to the slip ring or telemetry in option. The slip ring version can include wheel speed information, as well as addition measurements (temperature, etc...).

Slip ring Telemetry
Installation Telemetry

Applications

  • Driveline efficiency measurement
  • drag torque measurement
  • rolling resistance measurement
  • braking system assessment
  • fuel consumption assessment

Options and accessories

  • Slip ring or telemetry
  • Signal conditioning (amplifier)
  • higher temperature capability
  • adapters (rim, hub)
  • Power supply
  • Wheel speed information (encoder)
  • slip ring mounting kit
  • higher resolution version (0,1 Nm) (TW12.8HRMS175)### Presentation
Application
Automotive - LD veh.
Moment capacity
4000 Nm
High resolution Version
no
Rim Size
14 - 15 - 16 - 17 - 18 - 19 - 20 - 13 "
Nonlinearity (% FS)
± 0.1 %
Hysteresis
0.05 % FS
Analog output signal
non-amplifié
Tension d'alimentation
10 Vcc
Température de fonctionnement
-40 to 177 °C
  • Outter diameter: 291,57
  • Inner diamerter: 149,40
  • Width: 25,65

Dimensions

  • Enhanced High Resolution
  • Special Units for high temperature applications
  • Custom designs with alternative output sensitivities / load capacities
  • Weatherproof Slip Ring
  • Encoder / Amplifier (with or without display)

Related products

LW12.8-50 - 6 Axis Wheel Force Transducer  - 50 kN - Passenger Car and SUV

LW12.8-50

6 Axis Wheel Force Transducer - 50 kN - Passenger Car and SUV
couple de roue

TW12.8

Wheel Torque Transducer – 8kNm
couple de roue

TW12.8ER

Wheel Torque Transducer – 5,4kNm
Phone +33 1 46 91 93 32