Ref: G01A02

Single-channel IEPE conditioner - low cost - Gain x1 or x10

Analog conditioner for IEPE sensor
Portable use (via 9V battery) or external power supply (7-24 VDC)
Gain factor: 1 and 10
Connectors: BNC (input and output)
Output signal: +/- 6V
Noise level: 0.01 mVrms (gain 1) or 0.1 mVrms (gain 10)
Frequency range 0.1-100K Hz (gain 1) or 0.1-50K Hz (gain 10)
LED operating indicators (green/red)
Dimensions 97×61×27 mm

Delivery time : 4 weeks

Introduction

The G01A02 is a single-channel conditioner for IEPE sensors (accelerometers, force and pressure transducers, etc.). The signal obtained is a +/- 6V voltage. The G01A02 can run on a 9V battery, making it particularly suitable for field testing. An external power supply can also be used, with the required voltage ranging from 7 to 20 VDC. The signal can be amplified by a factor of 10.

Specifications

Gain factor	X1	X10
Power supply	Batteries (9V) and external power supply (7-24V)	Batteries (9V) and external power supply (7-24V)
Sensor power supply	2 to 10 mA (4 mA standard)	2 to 10 mA (4 mA standard)
Frequency range	0.1-100K Hz	0.1-50K Hz
Noise density	0.01 mV rms	0.1 mV rms
Accuracy	+/- 1%	+/- 1%
Connectors	BNC (input and output)	BNC (input and output)
Dimensions	97×61×27 mm	97×61×27 mm