Ref: KD39 - ±5N à ±20N

Double bending beam force sensor- 5 to 20 N

type: double bending beam force sensor;
nominal force: ±5N, ±10N, ±20N
accuracy class: 0,1 %;
non-linearity: 0,1%
Operating force limit: 400%
Lateral force limit : 500%
dimensions: 39mm x 12mm x 6mm;
force transmission: female thread M2.5x0,45;
Bridge voltage supply : 1 to 10 VDC
connection: 1 m STC-31V-4;
material: aluminium IP65; 5g
Operating temperature : -10 to 85°C

Presentation

The force sensor KD39 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3. There is a thread M2.5 for force transmission.

Force transmission is displaced parallel under loading. The force sensor tolerates displacements of force transmission and lateral forces due to its design as a double beam (lateral force limit : 500% of nominal force)

The force sensor KD39 is designed as a multi-range sensor. Available measuring ranges are : ±5N, ±10N, ±20N.

The accuracy of 0.1% is already reached at a nominal output of 0.5mV/V. This means that the zero point stability is 4 times higher than in a sensor with nominal output of 2mV/V. The KD39 force sensor can be used up to an output signal of 2mV/V or up to four times the specified nominal force.

Various solutions are offered for the output amplification including: