Ref: KR70

Low-profile flanged force sensor | ± 20N to ± 100N

Low-profile flanged force sensor
Measurement range: ±20 N, ±50 N or ±100 N
Non-linearity: ±0.02%
Dimensions: Ø 110 mm x 14 mm
Bore: 12 mm H7 - PCD: external 58 mm, internal: 30 mm
Mounting and force introduction: 2 x 4 x M4x0.7
Tension/compression measurement
Overload protection: 200%
Output signal: 1 mV/V
Operating temperature: -10 to 85°C
Temperature compensation: -10 to 70°C
Connectivity: 3 m cable
Material: Aluminium

Overview

The KR70 force sensor is a precision sensor (0.1%) for measuring tension or compression forces up to 100 N. With a thickness of only 12 mm, it provides a real advantage for integration in limited spaces. The operating temperature range is -10 to 85°C. Temperature compensation is applied between -10 and 70°C.

Specifications

Version	±20 N	± 50 N	± 100 N
Measurement range	±20 N	± 50 N	± 100 N
Non-linearity	0.1 %	0.1 %	0.1 %
Hysteresis	0.02 %	0.02 %	0.02 %
Bridge supply	2.5-10 V	2.5-10 V	2.5-10 V
Output signal	1 mV/V	1 mV/V	1 mV/V
Overload protection	200%	200%	200%
Material	Aluminium IP66	Aluminium IP66	Aluminium IP66
Drawing	Drawing	Drawing	Drawing

Installation

Bridge supply: 2.5-10 VDC

Conditioning and acquisition

The KR70 force sensor is powered by 2.5 to 10 VDC. A complete and configured measurement chain can be obtained by adding a display, conditioner, or acquisition module:

9840 Display	GSV-2TSDI	GSV-3USB	PMI-520AJ	GSV-1A	GSV-6K	GSV-6L	MICRA-M

High-precision digital display 1 or 2 channels	24-bit display with acquisition function	USB acquisition module	Precision analog conditioner voltage or current output	IP66 analog conditioner output ±10 V or 4-20 mA or 12±8 mA	In-line conditioner output ±10 V or 4-20 mA or 12±8 mA	Miniature PCB conditioner output ±10 V or 4-20 mA or 12±8 mA	Single-channel display