Ref: TS70a / Reaction torque

Static trorque transducer +/- 2Nm to +/-10Nm - high accuracy

Static torque meter
Measuring range: ± 2 Nm; ± 5 Nm, ±10 Nm
Sensitivity: 0.5 mV/V
Accuracy class: 0,1 %;
Dimensions: Ø 70 mm x 10 mm;
External diameter: 58 mm - internal diameter: 30 mm;
Bore: 12 mm;
Centering shoulder 16mm;
Connection: 2 m cable STC-31V-4;
Material: aluminium
Weight: 100 g;
Optional calibration certificate
Overload protection: 150%

Introduction

The TS70a torque transducer consists of an outer and an inner flange which are connected by 4 shear beams. The outer and inner flanges each have 4 M4 threads for torque input. The output signal is unamplified. 3 measuring ranges are available: ± 2 Nm ± 5 Nm ± 10 Nm The sensor is suitable for measuring the reaction moment in drives and test benches.

Packaging and acquisition

Possibility of obtaining a complete and configured measurement chain by adding a display, conditioner or acquisition module. See our selection :

Display : Allows to display the measurement directly in units, to manage thresholds, max-min values and an amplified output.
Conditioner : Amplifies the measurement signal and outputs a voltage or current (±5, ±10 VDC, 0-10 VDC or 4-20 mA).
Acquisition system : Transmission of measurement signals to a PC, PLC, recorder or SCADA application. Post-processing of measurement data via Excel or Matlab.

rotatif / statique: static
Moment capacity: 2 / 5 / 10 Nm
Measuring Range (Torque): 1 - 10 Nm
Montage_Capteur: flange
Nonlinearity (% FS): ± 0.1 %
Signal otuput: analog (mV/V)
Sortie régime: Non
Tension d'alimentation: 10 Vcc
Température de fonctionnement: -10 to 60 °C
Connecteur: STC-31V-4
Protection Class: IP65