Ref: LSOX

Rugged 1 axis servo inclinometer - ± 1 to ± 90° - analog output

Rugged single-axis force balanced inclinometer
Measurement range: ± 1 to ± 90°
Accuracy: 0.02 to 0.05% of FSO
Resolution: 1 µradian
IP66 enclosure - shock limit: 1500 g
Output signal: 0-5VDC, ±5VDC or 4-20 mA
Operating temperature: -40 to +80°C
Power supply: 9 Vdc to 18 Vdc

Présentation

LSOX series of uniaxial inclinometers meets the most demanding requirements in terms of accuracy and robustness. The extremely fine angle is measured by gravity using an inertial servo pendulum and an optical sensor. Accuracy is better than 0.05% of full scale, with a bandwidth of up to 30Hz and exceptional resolution of 1µrad. The default measurement ranges are ±1°, ±3°, ±14.5°, ±30° and ±90°, and can be customised as an option.

LSOX signal output is analog (0-5VDC, ±5VDC or 4-20 mA). The temperature sensitivity of LSOX is extremely low (< 0.0003V/° over the ±90.0° range).

LSOX is designed for intensive use in harsh industrial environments, including outdoor installation: operating temperature: -40 to +80°C, vibration and shock resistance (shock limit: 1500g), low noise sensitivity, IP66 waterproof enclosure.

Installation

The LSOX-L inclinometer is mounted on the application using 2 M4 screws. Electrical connection is made either via a 6-pin connector, a pin block or bare solder wires. Optional connectors and cables are available.